View Full Version : Replacing Exhaust Rubbers
MattyH16valver
18-06-2007, 23:57
While my car was up on the ramps the otherday for tracking I asked them to source where the rattling sound was coming from. We eventually found out is was the mid-section rubber that was making a noise cos it is perished.
How easy are these to change...they all look pretty worn now...is it just a matter of pulling them off? Did'nt have any in stock at the garage.
MatBrown
19-06-2007, 00:07
Yeah, easy to swap.
Mat.
MattyH16valver
19-06-2007, 00:13
Cheers :)
you can get uprated ones from power flex.
MatBrown
19-06-2007, 18:28
How much are they?
Might be worth getting a few in, Group buy?
Mat.
AndyFielder
19-06-2007, 20:20
£10 each i think... group buy would be wlecomed and quick as there cheep!
http://www.rallydesign.co.uk/catalog/index.php?cPath=1385_946_950_955_956
nine quid for a kit.
http://www.rallydesign.co.uk/catalog/index.php?cPath=1385_946_950_955_956
nine quid for a kit.
lol
group buy... save 8p!
AndyFielder
19-06-2007, 20:32
:P
AndyFielder
19-06-2007, 20:32
thought it was £9 each! leave me alone!
i got the ones from Rally design and they are slightly shorter than a normal one, after fitting mine the exhaust had to be adjusted as it was then too high up on the car
i got the black ones
i,ve got the red ones and they seam fine.
Bailey_1260
19-06-2007, 20:56
Where can i get standard ones from?
My rear one has snapped and as far as i can see halfords dont sell them anymore.
Alos does anyone have any pics of what it looks like (sorry for the hijack)
Bailey
MattyH16valver
19-06-2007, 21:17
Are the rest of the rubbers along the exhaust the same shape as this one?
http://i28.photobucket.com/albums/c226/MattyH16v/pxbush.jpg
No thats not how they look at all. thats just a generic picture they have put up for poly x mounts.
They should look 'U' shaped. Just same as standard reno ones but orange (poly-x material), btw I had a set of the poly-x mounts and they all snapped within a week :evil: damn scorpian exhaust.
MattyH16valver
19-06-2007, 22:46
So is it best to get some standard ones then...or would most motor factors be able to upply them?
had mine on for at least two years and there still good. also stopped my mongoose knocking
go to Kwik Fit if you cant find them in any shops, and ask to buy some of theirs, they will have loads of them
aye any exhaust place should have um, they'll prolly do you a handful for a few quid... or try a local motor factors.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.