PDA

View Full Version : Putting new springs on my williams.



Piper
18-06-2007, 18:36
Question is what else should I change when doing this. Looking at stuff in the same area that would wear over time.

MAXIBOY
18-06-2007, 18:38
top mounts and top bearings really.

MAXIBOY
18-06-2007, 20:19
R45712 STRUT TOP BEARING CLIO >9898 6.90 Add
R45714 STRUT TOP MOUNTING CLIO >98 9.25 Add

Piper
18-06-2007, 20:43
R45712 STRUT TOP BEARING CLIO >9898 6.90 Add
R45714 STRUT TOP MOUNTING CLIO >98 9.25 Add

Nice one Maxi are these the part codes I need ??

MAXIBOY
18-06-2007, 21:04
yes from Gsf not renault

Piper
18-06-2007, 23:42
i thought those numbers looked a bit short for renault. Is there anything else worth replacing on around the wheel assembly?

MAXIBOY
19-06-2007, 01:13
not unless it worn. these items are a pain to do and cheap and have to come off anyway. the reat is separate really so there,s little advantage. i would jack the car up with the wheels on and check for play first though to check the other bits before you start. as if there is anything worn you might as well do the lot.