PDA

View Full Version : Can somebody measure for me........



Rudders16v
25-05-2005, 13:36
the distance between the centre of the rear wheel and the rear arch on a STANDARD height Williams, just need to know if mine is actually any lower or not for insurance......

Cheers

NickFr
25-05-2005, 14:03
the distance between the centre of the rear wheel and the rear arch on a STANDARD height Williams, just need to know if mine is actually any lower or not for insurance......

Cheers

Posted: Sat Mar 05, 2005 6:15 pm Post subject:

--------------------------------------------------------------------------------

The standard ride height for the Williams should be:

H1 - H2 = 121.5mm +/- 7.5mm (Front)
H4 - H5 = 45mm +/- 7.5mm (Rear)

Where H1 and H4 is the centre of wheels to ground,
H2 is Front side member to ground at wheel axis,
H5 is Rear suspension arm axis to ground.

Vehicle should be unladen, on a flat surface with full tank of petrol and correct tyre pressures.



Mat.