View Full Version : Wheel Bolts
whats the spec of standard clio 1.8 16v wheel bolts? diameter, thread pitch and length?
i need to get elongated bolts for my 15mm per side spacers so need to know what the std is and go from there!
thing is i want matching bolts and locking ones aswell, so i'll need 6 standard chrome bolts and 2 standard length locking bolts for rears then 6 long bolts and 2 long locking bolts that match the rear locking nuts. think am askin bit too much!
could buy a full set and trim the rear ones down. or demon tweeks do a stud conversion in different lengths so you could convert them all to studs then fit matching wheel nuts and locking nuts. i think there m12 x 1.5 but i,ll can check later.
i checked the pitch, they are 1.5's but is thread diameter from max width of thread or minimum(i.e. shaft width?) as i got shaft width as 10mm so M10 but not sure?
def m12. wasn,t 100% sure on pitch
cheers matey, pitch is definatly 1.5, i'll sort summit! :wink:
try tweeks they have all sorts
sorted fella, found random place that sells any fitment, just choose seating, pitch, thread diameter and length! 8)
AndyFielder
16-06-2007, 00:41
link for the place?
could do with a matching set for the new wheels.... if they ever arrive!
i fancy the stud conversion with some titanium wheel nuts
umm stud conversion for the cup could be handy. will have a look on tweeks.
http://www.demontweeks.co.uk/products/ProductDetail.asp?cls=MSPORT&pcode=GRYSS29&vat=inc
these yeah ?
What fitment? 12x1.5x ??
think standard are 30mm thread 20mm head so 50mm plus allowing 10mm in the wheel so i would say min 60mm but maybe next size up 80mm would be to long. i would be one of each to start with and test or as there the same price the 80mm ones and trim them if there to long buy 10mm
on second thought 60mm should be long enough as they bolt up normally. might even go for 50mm but 60mm to be sure.
i take it they come with nuts as well, although you mentioned 1.94 plus nuts above?
don,t think so. nuts are separate but you could get these from a scrappy unless you want light weight alloy coloured ones for 4 quid each
our maybe try ford as i think they still used nuts on a number of vehicles and there cheap
http://cgi.ebay.co.uk/20-ALLOY-WHEEL-NUTS-ESCORT-FIESTA-FOCUS-MONDEO-PUMA_W0QQitemZ260127167626QQihZ016QQcategoryZ21654 QQtcZphotoQQrdZ1QQcmdZViewItem
just over a quid each
http://www.graystonengineering.com/wheelnutmenu.htm
above link
click wheel nuts
click alloy wheel nuts coloured
plenty of colours
http://rallynuts.com/motorsport/Wheel_Nuts_1838/
stevie_b
23-07-2007, 11:59
http://www.demontweeks.co.uk/products/ProductDetail.asp?cls=MSPORT&pcode=GRYSS29&vat=inc
these yeah ?
What fitment? 12x1.5x ??
Did you buy these in the end? If so which size/length did you go for as I want to get studs for mine. Cheers.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.