PDA

View Full Version : Fitting subframe bush???



BristolSam16v
14-06-2007, 22:00
Bought a new bush for the drivers side subframe bolt, tapped the old 1 out easily enough but the new one just won't go in!! Now I can't get the old one back in either!!

I tried putting the bolt in and tightening it up so hopefully it would squeeze the bush in, but it got so tight then fcked the bolt/nut up!! Now I have to angle grind the new bolt off, and the fcking bush still isn't in :( Tried jacking it in but no avail right stubborn basterd.

Anyone changed this before?

Chris H
15-06-2007, 17:11
hit it in you poof.

Don't finger bang it like that skank behind the boiler room when you were 11

BristolSam16v
15-06-2007, 19:59
Lol hit it??? I destroyed the subframe bolt/nut trying to press it in, just had to cut the bolt off took ages!

Lubed up the new 1 with a bit of grease and greased the subframe and went straight in ¬¬