PDA

View Full Version : 5mm pin punch



Matty86
12-06-2007, 13:57
Im after one of these to remove a driveshaft, but can't find anywhere that sells em!


anyone got any recommendations?

stevie_b
12-06-2007, 14:20
I used an old 5mm drill bit as the punch. Tapped the end with a hammer, not using it to drill it out!

Matty86
12-06-2007, 14:24
thats looking to be my option now as well


just hope its strong enough, as I might have wedged a bradle in there :oops:

lukebartlett2405
12-06-2007, 16:02
you can use anything as long as you take the point off it or the pin spreads in place and is harder to get out i used an old nail just took the point off

arj256
12-06-2007, 16:23
Ebay and screwfix sell them
Usefull tool to have a set of punches.

Matty86
12-06-2007, 17:20
think ive fooked it up now


wont budge at all

cant even drill it out!! :shock:

Bailey_1260
12-06-2007, 18:56
Tyr t from the other side.

Will need a good slap.

Mine disintergrated :P

BristolSam16v
12-06-2007, 21:00
Any decent motor factor will sell a set of punches!

AndyFielder
12-06-2007, 23:11
GSF sell sets mate!