PDA

View Full Version : picture request



NAPLES VALVER 123
10-06-2007, 23:10
does anybody have a picture of the back of the engine block with starter motor heatshield off and on. i cant work out which way it goes on and how it bolts on :oops:

northy
11-06-2007, 10:30
there are two types of heatshield bracket...valver and williams mate

This is a williams one

http://i4.photobucket.com/albums/y107/northy_com/DSC00874.jpg

NAPLES VALVER 123
11-06-2007, 13:09
im sure mine looks different to that. the bracket is simular but the heatshield is like a mini manifold heatshild one :?

MAXIBOY
11-06-2007, 13:55
yes mate thats the starter motor heat shield. should have three fixing holes. two which bolt to that bracket type above and the front one that bolts to the little bracket that fitted to the middle starter motor bolt. they are special 10mm bolts with built in spacers and washers to stop you over tightening them and destroying the heatshield. looked but can,t find any picks.

NAPLES VALVER 123
13-06-2007, 17:14
http://img507.imageshack.us/img507/2967/dsc00410zc2.jpg
http://img507.imageshack.us/img507/7861/dsc00413jd4.jpg

this is how ive got it at the mo, what is missing?

any help much appreciated 8)

snowman
13-06-2007, 17:24
starter heatshield is missing

http://i6.photobucket.com/albums/y226/bluedragon101/gg61.jpg

NAPLES VALVER 123
13-06-2007, 17:37
thats ok ive got one of them thankyou for the picture i couldnt figure out which way around it goes :? :)

Is there anything else that goes on to that side of the block as there seems to be alot of holes :?

Do you have anymore general pictues of the engine in one piece?

Does the manifold have a bracket which attachs to it?

MAXIBOY
13-06-2007, 17:52
yes the heatshield in northys pic is missing from yours and the manifold bolts on there somewhere.

snowman
13-06-2007, 17:58
what extra holes do you mean,looks like you got it all fitted apart from the 2 heatshields?