PDA

View Full Version : Oil pressure sender and level + temp sensor



Robb
05-06-2007, 17:34
Found out that my oil pressure is dead and so is my oil temp sensor even though the level still works. So hopefully my engine wont need rebuilding :P

Looking on GSF i cant see an oil pressure sender is there anywhere else that sell it?

R93493 - OIL TEMP.SENSOR-WHITE - CLIO 1.8/1.8 16V/19D >98

i guess this must be the sensor that reads the oil temp and level?

Just want to make sure before i go ahead and order one.

Cheers

Robb
05-06-2007, 17:39
Or am i being stupid and it's really called oil pressure switch? :lol:

Rich
05-06-2007, 18:42
thats not the correct one. that is the plug next to the oil filter. the senders you need are renault only.


pressure switch is about £90 and oil level/temp is about £50. If i were you i'd source some second hand

Robb
05-06-2007, 19:20
.... That's expensive i wasnt expecting that. :cry:

Rich
05-06-2007, 19:33
yeah hence i took the second hand route when replacing mine as i looked at new ones

1fast6
06-06-2007, 16:35
pretty sure its not possible to replace the oil level/temp sender without removing the rad...

Couldn't get a spanner to it last time i tried, that was with removing the cross beam and trying to pull the rad forward.