PDA

View Full Version : R19 gearbox mount



Adi82
04-06-2007, 19:54
I tried ordering the R19 gearbox to subframe mount for my williams on friday but didnt get too far.

Using the codes off the guide i was told that some of the part numbers now dont exsist or come in packs of 10. (see below)

77 03 101 157 SCREW x 4 (Not available)

77 03 034 122 NUT (Bags of ten only)

77 03 034 106 / 7701417222 (Second number not available and first number changed to 77 11 171 012)

The other parts were ok. Can someone confirm what the part numbers are and if there still available as i really need to get them ordered tomorrow.

Thanks Adi

Coops
04-06-2007, 20:49
screws for the plate are 7703101296 x4

my rubber bush came with 2 nuts already on it?

Clio_GTT
04-06-2007, 20:49
77 11 171 012 is an M10 nut i think

where they say the nuts are only available in bags of ten just get some normal normal nyloc nuts from any motor factors.

According to my dialogys you only need 4 of the 77 03 101 157 bolts, 2 77 03 034 122 Nuts, a washer and the actual mount + bracket

The anomalous part number is just another nut which is why i've said to buy 2 of the other nuts (i'm assuming they're the same thread)

Clio_GTT
04-06-2007, 20:50
well done coops 8)

Coops
04-06-2007, 20:51
number of times this reciept has been out since i bought em! :P

richy
04-06-2007, 20:51
screws for the plate are 7703101296 x4

my rubber bush came with 2 nuts already on it?

thats cus i took them out of parts! :wink:

Coops
04-06-2007, 20:53
ah! cheers mate, saved me couple of quid! :wink:

Clio_GTT
04-06-2007, 20:58
ah! cheers mate, saved me couple of quid! :wink:

are they M10 x 1.5 nyloc nuts coops ? if so the lad could save a couple of quid and NOT buy them at renault lol

richy
04-06-2007, 21:00
no not nylock nuts but will be fine espif a drop of locktite, mines been on for years with no problems!

Adi82
04-06-2007, 21:49
cheers guys thanks for the help