PDA

View Full Version : quick question :)



Turbloide2
26-05-2007, 13:42
How to clean the idle control valve out ??

Ive got it off and want to clean it out Thanks

mikeymikewakey
26-05-2007, 13:56
Carbon Cleaner and a cotton bud

Mike

peteh
26-05-2007, 14:08
stupid question, but you don't know till you ask, which one is the iscv? :oops:

Turbloide2
26-05-2007, 14:21
Thanks for the reply.

Would carb and clutch cleaner do the trick with a coton bud ? is the unit sealed and u clean it throught the 2 holes ???


The iscv is at the front of the inlet manifold with a plug connector on the top circle unit thingy... hope that helps

richy
26-05-2007, 14:26
yeah brake/carb cleaner is fine, just use that and a cotton bud and work it abit, should get all the crap out of it lol

schakal
26-05-2007, 14:57
and after doing all that move the thing
clockwise and anti clock wise sharply
and make sure the valve in there spins back and
forth freely as idleing problems related to these
are usually caused by a stuck valve :wink:

Turbloide2
26-05-2007, 18:29
Thanks peeps all done now, tick over nice and low :)

big hp
29-05-2007, 07:49
Thanks for the reply.

Would carb and clutch cleaner do the trick with a coton bud ? is the unit sealed and u clean it throught the 2 holes ???


The iscv is at the front of the inlet manifold with a plug connector on the top circle unit thingy... hope that helps

Sits just to left of airbox on front of inlet manifold.