PDA

View Full Version : Is my williams chipped? or what?



Crowds
23-05-2007, 18:01
Rght i brought the williams saturday now i read they are limited to 6500 but mine revs to 7000 cleanly no puffing etc. Now i'm not sure on the history of the car as it was stolen and recovered in the past

the ecu codes a re

S101262105a

HOM7700851741
BVM
7700857528

Bar code 2104317527/91309

Any help gents? it doesnt look like anything has been soldered on the circuit board... though if it has they were bloody neat.

ecu.....


http://i35.photobucket.com/albums/d185/Crowds/ecu1.jpg


Cheers Paul.

big hp
23-05-2007, 18:05
Northys williams revs to 7k as well when its warmed up and his isn't chipped i believe.

6500 is "normally" the williams limit.

Jamie.
23-05-2007, 20:01
mine got to 6.8 a while ago, just after i stripped it out, made me change up a little late, dont reckon its chipped tbh.

northy
24-05-2007, 07:54
6.9ish Big Hp when hot.....nearly had it on 7k though :twisted:
From memory it was 3rd gear to 4th.

http://i4.photobucket.com/albums/y107/northy_com/th_CLIP0004.jpg (http://s4.photobucket.com/albums/y107/northy_com/?action=view&current=CLIP0004.flv)

Does it limit bang on 7k or 7200 ?

northy
24-05-2007, 07:56
http://www.williamsclio.co.uk/forum/viewtopic.php?t=19574

Crossers
24-05-2007, 07:57
Mine varies. Goes higher when fully warm. ~6.8-6.9k

Bit like the 172/182's. Their limit raises when fully warm.

Paul

northy
24-05-2007, 08:00
sounds standard to me.....You can nudge the limiter forwards once the oil temp goes up. Sometimes mine has good days where i can get near seven, then others its 6500

Crowds
28-05-2007, 23:21
rite after more testing it seems to rev to 7,300... maybe the ecu was stolen before or something and replaced with a 16v one? it runs perfect no flat spots etc its odd????