PDA

View Full Version : Lowering - How much?



mikeymikewakey
23-05-2007, 07:44
Hey guys,

how much would be a good amount to lower my valver?

It will be running with williams wider track on 15" rims with 195/50/15's.

I want it to be low but dont want it to scrub.

Mike

MAXIBOY
23-05-2007, 08:56
50mm maybe.

rob-legend
23-05-2007, 09:19
i've got mine lowered 50mm at the front, it doesn't rub, but it becomes a pain in the arse.

Joel
23-05-2007, 16:25
im going for -40mm on 185/55/15 Tyres!

Dunno if itll scrub, as it dosent have Valver Wings! :cry:

Robb
23-05-2007, 16:29
Mines lowered 40mm on a normal valver track, rubs on the inside of the arche on 195/50/15

Smudger
23-05-2007, 16:48
id get your tracking sorted mate, unless your running diff wheels to standard which have a different offset??

steveo
23-05-2007, 17:27
I lowered mine 35mm on the front and one notch on the back but should have gone 50mm really. Does rub and handles really well. Bit bumpy - but all good
http://i142.photobucket.com/albums/r120/stevewilde_2006/2007-01-30012.gif :lol:

mikeymikewakey
27-05-2007, 11:29
Looking good! I think im just gonna be subtle and for for 35-40mm

Robb
28-05-2007, 20:39
id get your tracking sorted mate, unless your running diff wheels to standard which have a different offset??

Completely standard, not much of a probably though as long as i dont go on full lock :lol:

VIPERONE
28-05-2007, 20:57
2mm with cup springs.

or 25 mm.

willy3
28-05-2007, 22:42
55mm on 45 profile tyres, a bit bumpy but good on the roads, dosen't rub at all.......on apex springs and avo shockers adjusted to soft......had 55mm on valver with 17's only rubbed on full lock if going up a slight incline.....

Coops
28-05-2007, 23:05
old valver was on its arse and never scrubbed, standard track and wheels

new one is in 4x4 mode atm, watch this space! :lol: