schakal
22-05-2007, 20:20
my aftermarket gauge and sender have arrived :)
now i am going to use one of them
adaptor thingies to fit the sender unit .
http://i24.ebayimg.com/01/i/000/9f/7b/e679_1_b.JPG
the main thing i want to achieve is to position the
sender unit before the thermostat so that the reading is there
regardless of thermostatic operation especially from cold
if that makes sense ?? :roll:
so in that respect ,am i right thinking that either one
of the heater matrix pipes will do the job as they
exist in the primary water circuit .
i.e : luke warm water circulates there before the stat opens .
now i am going to use one of them
adaptor thingies to fit the sender unit .
http://i24.ebayimg.com/01/i/000/9f/7b/e679_1_b.JPG
the main thing i want to achieve is to position the
sender unit before the thermostat so that the reading is there
regardless of thermostatic operation especially from cold
if that makes sense ?? :roll:
so in that respect ,am i right thinking that either one
of the heater matrix pipes will do the job as they
exist in the primary water circuit .
i.e : luke warm water circulates there before the stat opens .