PDA

View Full Version : Audio Bits?!?!



Tizer
21-05-2007, 19:34
Would Prefer to sell the box as one but will split if the price is right, It is very very heavy so postage would be v expernsave, i live in canterbury Kent, but would travel to sell.

http://img177.imageshack.us/img177/1863/dscf2047ij8.jpg
2 x Vibe: PT-100 - 10" subwoofer
Product Features
10" PulseAir subwoofer
RMS Input Power: 125 W
Peak Output: 400 W
Sensitivity: 89 dB
Frequency Response: 30 - 1,700 Hz
Impedance: 4ohm

Twin 10" Ported Sub Box

http://img380.imageshack.us/img380/4646/dscf2053gw4.jpg

Crunch: MXB-480 Amplifier
Product Features
4 x 80 Watts @ 4 Ohms
4 x 160W @ 2 Ohms
2 x 320W @ 4 Ohms
BlackMaxx Flo-Thru Heat Sink Design
PWM Mosfet Power Supply
Fully Bridgeable Design
Black High Quality PCB Design
High Speed Mosfet Output Devices
Class AB Operation
Separate Bass and Treble Controls with Switch
HP (High Pass) from 60 Hz to 1.2 kHz Adjustable Crossover Network
LP (Low Pass) from 40 Hz to 150 Hz Adjustable Crossover Network
HP/LP/Flat Select Switch
Silver RCA Line Input , High Level Inputs
Silver RCA Line Output for Amplifier Daisy Chaining
Internal Protection Circuitry
Green "On"LED, Red "Protect"LED
WxHxL :285mm x 55 mm x 251mm

http://img463.imageshack.us/img463/2925/dscf2002xr4.jpg
Sony XM-255EX Amplifier
Audio system
Display Controls: Gain
Response Bandwidth: 5 - 100000 Hz
Signal-To-Noise Ratio: 100 dB
Max Output Power / Channel Qty: 120 Watts x 2
Continuous Power / Channel Qty: 55 Watts x 2
Input Channel Qty: 2 channel(s)
Amplifier Output: 2-channel
Output Channel Qty: 2 channel(s)
High Level Inputs: Yes
Input Signal Voltage: 0.2 - 4V
Crossover: Active crossover
Crossover Channel Qty: 2 channel(s)
Low Pass Frequencies: 50 - 200 Hz
Output Power / Total: 300 Watt
Distortion Factor: 0.01%
Amplifier Output details:
140 Watt - 4 Ohm - 20 - 20000 Hz - THD 0.1% - 1 channel(s)
70 Watt - 2 Ohm - 20 - 20000 Hz - THD 0.1% - 2 channel(s)
55 Watt - 2 Ohm - 20 - 20000 Hz - THD 0.04% - 2 channel(s)
Soft Start / Quiet Turn-On: Yes
Features: Gold-plated connectors
Connections
Connector Type:
1 x audio line-in ( RCA phono x 2 )
1 x audio line-out ( RCA phono x 2 )
Speakers input
Speakers output ( screw-type )
DC power input ( screw-type )

lewis_willy2
22-05-2007, 18:22
cant believe you live in canterbury!! could have picked that amp up!!!

Tizer
23-05-2007, 08:05
cost me £8 to post lol