PDA

View Full Version : Chrome Engine parts



zmaster2k
18-05-2007, 16:20
Where oh where , can i get some chromed engine parts?

i want rocker and inlet manifold and anything else!

I want some bling!

Also how hard is it for a newbie to remove and refit the inlet manifold?

Coops
18-05-2007, 20:00
inlet is a bit of a git, power steering pump/brackets get in the way

i have a slighlty poor chrome rocker for sale, but tis past tis best, bit bobbled n flakey

cliorod
18-05-2007, 20:36
http://www.rschrome.co.uk/

Maybe a bit far away for you :cry: :cry: ,but they are very good.I have taken,two old motorbike wheel rims,silencers,exhaust pipes,plus lots of bits "n" pieces,also took a TRIUMPH SPITFIRE rear bumper ~ cost £150 and was turned around within 2 weeks.
Hope it helps

clio_bus
18-05-2007, 22:13
^^ yeah i`ll seconed that, i also have had work done there, Great job!

zmaster2k
19-05-2007, 10:40
ok what tools do i need to remove the inlet manifold and the rocker cover?

Coops
19-05-2007, 11:43
rocker is just 16 10mm bolts, after you have removed HT leads and plastic runner (dont forget oil cap! :lol: )

inlet is a bit trickier, 10mm spanner, 13mm spanner, erm, little spanner for cold start injector union, maybe 10mm again, possible 15mm for brackets underneath to the block

zmaster2k
19-05-2007, 13:37
rocker is off, piece of p*ss.



do i have to reomve the radiator? for the inlet?

Coops
19-05-2007, 13:44
i wud guess so yes, otherwise access is gonna be difficult, theres lots of little bolts n that holding it all over the place! :lol: