VIPERONE
22-05-2005, 21:49
Tools needed:
wheel brace
jack
30mm socket and breaker bar
16,17,18,mm spanner
start proccedings by removing your wheel.
1) remove 30mm hub nut
2) remove brake disc (torx key t25 i think)
3) remove suspension bolts (18mm spanner)
3) remove bottom ball joint bolts
4) tap out track rod end with a hammer
remove swivel hub.
reverse the procedure fitting new swivel hub on... copper grease your wheel bolts and tighten them to the correct torque settings... not excessively ;-).
wheel brace
jack
30mm socket and breaker bar
16,17,18,mm spanner
start proccedings by removing your wheel.
1) remove 30mm hub nut
2) remove brake disc (torx key t25 i think)
3) remove suspension bolts (18mm spanner)
3) remove bottom ball joint bolts
4) tap out track rod end with a hammer
remove swivel hub.
reverse the procedure fitting new swivel hub on... copper grease your wheel bolts and tighten them to the correct torque settings... not excessively ;-).