View Full Version : FAO anyone who has put ally sheet in place of suroof
Matt_16v
11-05-2007, 09:12
I've ordered some aluminium to do this and rivet a plate to the roof as I've had enough of bloody sunroofs!
My questions are: how did you make the template? from the old unit? the black surround??
What did you use to seal it when you rivetted it? just some std silocone??
Cheers
stevie_b
11-05-2007, 09:37
I just used some old card I had lying around. Cut to size of sunroof hole. Then put that sheet over the aluminium and scribe around the cardboard template but adding an inch (or some other fixed amount) the whole way round. Then just cut out the alu panel along the line.
I used standard silicone sealant on mine too. Not really been out in the rain much though so I do wonder whether it still might leak through where the rivets go through?
Matt_16v
11-05-2007, 10:17
thanks for the quick replies! has anyone got any pics of how it looks??
VIPERONE
11-05-2007, 15:14
I got a quote for£600 for a roof reskin...of considerably less for the ally sheet mod...suffice to say im off for the rivet mod...the sheet i have is huge..in order to give it strength and cover up the roof skin flex depressions. .. :-(
lol
nicely covered up with white vinyl and a renault diamond lol
Matt_16v
11-05-2007, 16:44
roof reskin? so thats take yours off, put a new one on and paint??
VIPERONE
11-05-2007, 17:10
yes...
not the way to go for a track car,..unless your budget allows
the hseet option is the most cost effective option by far lol
Clio_GTT
11-05-2007, 17:12
roof reskin? so thats take yours off, put a new one on and paint??
The whole roof is removed from the tops of the A,B and C pillars and a new sunroof-less version is welded on and sprayed
VIPERONE
11-05-2007, 17:13
^^^^^^^
BiNgO
^^^^^^^
lukebartlett2405
11-05-2007, 18:59
any one got any pics of there sunroofs sheeted ?
this is mine...
http://i4.photobucket.com/albums/y110/c20rfs/clio%2016v/valver018.jpg
i just took the sunroof out, measured the hole and added something like 1inch all way round or there abouts, mine is rivited on and also bonded on with monopac sealer(same stuff which holds windscreen in) and is rock solid and dont leak at all, this is on my 16v trackcar btw so i wasnt going to looks, just cheap/light/easy! :)
VIPERONE
11-05-2007, 19:46
class.
my sheet is considerably larger...due to the dents on the sun roof corners..
good effort
Think this is Midge's car now? Got thease pics from when it was George's.
http://i28.photobucket.com/albums/c217/pat_986/DSC00327.jpg
http://i28.photobucket.com/albums/c217/pat_986/DSC00246.jpg
roof reskin? so thats take yours off, put a new one on and paint??
The whole roof is removed from the tops of the A,B and C pillars and a new sunroof-less version is welded on and sprayed
except on the clio its removed along the roof rails.
Swervin_Mervin
12-05-2007, 00:25
this is mine...
http://i4.photobucket.com/albums/y110/c20rfs/clio%2016v/valver018.jpg
i just took the sunroof out, measured the hole and added something like 1inch all way round or there abouts, mine is rivited on and also bonded on with monopac sealer(same stuff which holds windscreen in) and is rock solid and dont leak at all, this is on my 16v trackcar btw so i wasnt going to looks, just cheap/light/easy! :)
8)
At some point I hope to get round to sorting the track car out and this is deffo on the list.
lukebartlett2405
12-05-2007, 06:53
thanks goinng to do mine this weekend
Once this is done, Can you just fit the headliner from a non sunroof model?
lee-8ballauto
16-05-2007, 19:31
why are you doing this? is it for track or road? bit atrocious looking if its just for the road
Fed up of a heavy leaky sunroof. Car is on 110k an worth sod all.
Will probiably track it when I get a new car.
So not too fused on how it looks TBH
VIPERONE
16-05-2007, 21:21
stick some white vinyl over it then it'll be fine.. looks far from atrocious lol
stick a rally vent in whilst your at it
VIPERONE
17-05-2007, 00:13
Once this is done, Can you just fit the headliner from a non sunroof model?
yes u will also need to fit the ir plip unit--ok the sheets are rather cheap: here is the supplier:
http://www.merlinmotorsport.co.uk/SHEETS-AND-TUBING-Aluminium-Sheet/c321_337/index.html
Once this is done, Can you just fit the headliner from a non sunroof model?
yes u will also need to fit the ir plip unit--ok the sheets are rather cheap: here is the supplier:
http://www.merlinmotorsport.co.uk/SHEETS-AND-TUBING-Aluminium-Sheet/c321_337/index.html
Very helpful, thanks Gunner.
Swervin_Mervin
17-05-2007, 14:09
Once this is done, Can you just fit the headliner from a non sunroof model?
yes u will also need to fit the ir plip unit--ok the sheets are rather cheap: here is the supplier:
http://www.merlinmotorsport.co.uk/SHEETS-AND-TUBING-Aluminium-Sheet/c321_337/index.html
Cool. What gauge would people recommend from that list?
roof is properly around 20 gauge steel. so maybe 18 gauge. the cheque plate is 14 gauge and thats quite thick stuff.
Clio_GTT
18-05-2007, 09:03
roof reskin? so thats take yours off, put a new one on and paint??
The whole roof is removed from the tops of the A,B and C pillars and a new sunroof-less version is welded on and sprayed
except on the clio its removed along the roof rails.
really ?
http://i51.photobucket.com/albums/f360/Clio16v-widetrack/roof.jpg
that's what dialogys throws up, looks like it goes to the a pillar
yes goes from the a pillar to the c pillar front to back but only between the roof rails side to side.
VIPERONE
18-05-2007, 11:56
ive never used a rivet too before... what sort of tool do i need, and again what sort of rivets??
and how do i work the tool..take it its simple enough as the tool looked basic in halfords
yes mate very simple. just squeeze the handles together. as for rivets they go buy diameter and length. i,d say 3.5 mm diameter and long enough to go though the ally and roof fit a washer and still crimp up. maybe 15mm.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.