PDA

View Full Version : K-tec Silenced decat.



Steve a
20-05-2005, 14:19
Only 12 months. Add a few more horses without increasing the noise level very worth while mod. stainless steel so will be around for generations to come. Cost £70 new will accept £30 can bring to fcc. Pics will be up later.

Swervin_Mervin
20-05-2005, 17:10
Does it definitely add anything?

Steve a
20-05-2005, 17:24
well renault proved it with the 16v, the very early 16v's came without a cat and produced 140bhp so 3bhp for £ 30 is a bargain :wink:

Swervin_Mervin
20-05-2005, 17:26
Just been juggling the idea for yonks as to whether to get a silenced or not.

Is it silenced on the outside (if you get my drift, round the pipe not in the pipe.)?

Steve a
20-05-2005, 17:59
Yes basically just like a backbox or any other siliencer. I'll get some pics up for you.

Steve a
20-05-2005, 18:34
Heres a picture of the decat pipe on there web site.
www.k-tecracing.com/show_product.asp?id=188

Swervin_Mervin
23-05-2005, 11:32
But backboxes etc normally have baffles within the pip don't they? I don't really want anything with baffles in if you get me, but if it's a straight through pipe with effectively a bit of wadding round it then I'll take it.

Steve a
23-05-2005, 12:12
Thats basically it mate. I'll bring it with me to FCS, so you have have a look.

Swervin_Mervin
23-05-2005, 12:18
That would be great Steve.

Rudders16v
24-05-2005, 10:28
I'll definatly have this off you Steve at FCS if SwervinMervin doesn't decide to have it

Steve a
24-05-2005, 10:45
Ok no worries.

Swervin_Mervin
31-05-2005, 10:27
Well, what a fvck up. Didn't even spot your car on the stand mate, only to find out after that you were only about 5 cars to the right of me! DOH!

Steve a
31-05-2005, 11:34
LoL no worries, my fault as well. :oops:

Rudders16v
31-05-2005, 14:55
And i completely forgot about this......

Swervin_Mervin, are you having this? If not, i'll take it off Steve's hands but i know you got in first so dont want o step on anyones toes

Cheers

Swervin_Mervin
31-05-2005, 16:18
I've decided to give it a miss fella, as I'm losing enough oil at the mo through a leaky sump, without burning a bit more from a de-cat.

I'm probably going to try and rigweld it but if that doesn't happen it's new sump time and it costs a bomb to get it done. May as well plump for a new subframe at the same time as that's seen better days, so I could do with saving a few pennies :?

Allan
31-05-2005, 19:13
if i had any money i would have taken it ;(

im far too poor now

Rudders16v
01-06-2005, 13:24
Sold to me............

To be fitted with the Hill Power IK soon......... can't wait!