PDA

View Full Version : phase 2 carbon boot strip.........



freebone16v
27-04-2007, 18:49
in good condition has been on mine for atleast 2 years, probably from new

http://i4.photobucket.com/albums/y120/freebone/100_1458-1.jpg

http://i4.photobucket.com/albums/y120/freebone/100_1459-1.jpg

£10 + p&p

kozicka
24-05-2007, 00:27
Interested, but how exactly do you remove the old one and fit the new one on? From what I can see there are a couple of screws, otherwise it looks glued on?

AndyFielder
24-05-2007, 00:32
3 screws... REMEMBER 3 dont snap one off at the scrappys :(

other than that is on poppers.

Andy

kozicka
24-05-2007, 01:37
3 screws... REMEMBER 3 dont snap one off at the scrappys :(

other than that is on poppers.

Andy

Thanks, although when I looked at it it looked glued on, mine is broken at the minute near the handle

OP, I may well take it off you, is it just the boot strip or any other bits? Just wondering what I will need from mine.

Hulio
24-05-2007, 11:27
It definitely shouldn't be glued on!!!

kozicka
24-05-2007, 13:30
I think its just the way the plastic has broken, I havent had a real look at how to get it off yet due to this problem:

http://www.williamsclio.co.uk/forum/viewtopic.php?t=22701

MatBrown
24-05-2007, 15:20
3 screws... REMEMBER 3 dont snap one off at the scrappys :(

other than that is on poppers.

Andy

Err,
There's 4 screws.


Mat.

katbloke
24-05-2007, 17:28
yeh 2 in the middle either side of latch and one at each end