View Full Version : phase 2 carbon boot strip.........
freebone16v
27-04-2007, 18:49
in good condition has been on mine for atleast 2 years, probably from new
http://i4.photobucket.com/albums/y120/freebone/100_1458-1.jpg
http://i4.photobucket.com/albums/y120/freebone/100_1459-1.jpg
£10 + p&p
Interested, but how exactly do you remove the old one and fit the new one on? From what I can see there are a couple of screws, otherwise it looks glued on?
AndyFielder
24-05-2007, 00:32
3 screws... REMEMBER 3 dont snap one off at the scrappys :(
other than that is on poppers.
Andy
3 screws... REMEMBER 3 dont snap one off at the scrappys :(
other than that is on poppers.
Andy
Thanks, although when I looked at it it looked glued on, mine is broken at the minute near the handle
OP, I may well take it off you, is it just the boot strip or any other bits? Just wondering what I will need from mine.
It definitely shouldn't be glued on!!!
I think its just the way the plastic has broken, I havent had a real look at how to get it off yet due to this problem:
http://www.williamsclio.co.uk/forum/viewtopic.php?t=22701
MatBrown
24-05-2007, 15:20
3 screws... REMEMBER 3 dont snap one off at the scrappys :(
other than that is on poppers.
Andy
Err,
There's 4 screws.
Mat.
katbloke
24-05-2007, 17:28
yeh 2 in the middle either side of latch and one at each end
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.