PDA

View Full Version : Coolant Expansion Tank cap colour



Matty86
23-04-2007, 21:40
Got a new expansion tank for the valver, and after chatting to some people, it seems the cap could be wrong...

its brown, like my last one (and my F3P engined car before). Apparently its meant to be blue?

After running for a while, all the coolant seems to get sucked out of the tank but comes back if you unscrew the cap a little... This can't be good! :o

so is it the right one?

Laine_16v
23-04-2007, 21:42
Brown is fine,

I went to ren and asked for a new one for my valver, he handed me a brown one i said.."this is the wrong one no? clio 1.8 16v's use a high pressure blue caps", he said that it had been updated and they use the brown caps too, did they update it my arse!

Ran it on brown cap and it was fine for months and months youve got no worry at all mate.

Matty86
23-04-2007, 21:46
6psi as opposed to 5psi I heard...

what with my coolant then? :?

I've drained it loads of times :(

summeh
23-04-2007, 21:53
sounds like air in the system. probably not bleeding it correctly. (do a search :wink: )

Matty86
23-04-2007, 21:55
nuts to that

its going in for its 108k service next week, let the garage sort it :p

mon
24-04-2007, 22:03
brown ok had brown cap since had clio.

MAXIBOY
24-04-2007, 22:04
blue available

mon
24-04-2007, 22:06
brown ok had brown cap since had clio.

MatBrown
24-04-2007, 23:16
I've only ever seen brown ones on all my cars.


Mat.