PDA

View Full Version : where are these from


MAXIBOY
13-04-2007, 23:02
can,t remember where they came from...

http://i36.photobucket.com/albums/e15/123maxiboy/Picture071.jpg

http://i36.photobucket.com/albums/e15/123maxiboy/Picture072.jpg

http://i36.photobucket.com/albums/e15/123maxiboy/Picture073.jpg

http://i36.photobucket.com/albums/e15/123maxiboy/Picture074.jpg

http://i36.photobucket.com/albums/e15/123maxiboy/Picture075.jpg

http://i36.photobucket.com/albums/e15/123maxiboy/Picture076.jpg

cheers
summeh
13-04-2007, 23:24
The long yellow one looks like the fuel line bracket, under the mount, should screw down on top of the chassis rails, although if you have rerouted your fuel lines you won't need it... also they normally have a plastic cage clipped to them.

The small hook like one looks like some unimportant hose/loom clip, one on top of the gearbox springs to mind for the loom, as I also have a spare looking like that.
MAXIBOY
14-04-2007, 00:02
no i,ve got the fuel one fitted. think they came off the subframe steering rack area.
1995clio16v
14-04-2007, 00:05
Bottom right one in the 2nd pic, Im sure that is for the accelerator cable to be kept tight against the bulkhead area?

Or some cable/pipe around that area.

Behind the heat shield somwhere?
summeh
14-04-2007, 00:07
hmm in that case then the small one could be a pas pipe clip... shot in the dark really... lol, how many nuts and bolts do you have left over?

I had a freezer bag full of nuts and bolts after my engine swap, and a good few brackets etc that I didn't bother refitting, mainly the inlet manifold ones. 8)
MAXIBOY
14-04-2007, 00:12
cheers. no bolts just a few brackets i can,t place. hoped someone would have an engine out a could place them. will check accelerator one tomorrow.
Coops
14-04-2007, 02:29
the 'U' shaped bracket, bottom of last 2 pics, is front bumper bracket from behind the number plate, inside the bumper, bolt goes through it into chassis/subframe to hold the bumper on!
VIPERONE
14-04-2007, 03:25
the 'U' shaped bracket, bottom of last 2 pics, is front bumper bracket from behind the number plate, inside the bumper, bolt goes through it into chassis/subframe to hold the bumper on!

Correct!
MAXIBOY
17-04-2007, 00:47
still anyone.
MatBrown
17-04-2007, 01:29
Sling 'em in the bin! :wink:


Mat.