PDA

View Full Version : Side exit exhausts



Dancliovalver
12-04-2007, 20:14
Is it easy to make one up youself??

do u take it from De-cat back??

and also how is the best way to hang one???

help would be muchos appriciated :lol:

MAXIBOY
12-04-2007, 22:13
depends on noise really. you could remove the cat and get a two box system. or cat bypass and one box. also you need a few new hangers added. bet any exhaust place could make one.

Dancliovalver
12-04-2007, 22:19
well the car its going on is now going to e a permanent track car so getting rid ojavascript:emoticon(':lol:')
Laughingf the cat is not a problem!!!!

not too fussede on noise as long as it passes the desabel (sp) test at track days :lol:

MAXIBOY
12-04-2007, 22:22
yes thats why it might need two boxes as track limits are quite strict. 98db,s i think.

Dancliovalver
12-04-2007, 22:23
kool, what do u mean by boxes mate, sorry for the thick questions just wanna get it right

MAXIBOY
12-04-2007, 22:31
boxes are the bits that are not pipes really. the boxes as such are the items that absorb the noise. so usually a quiet system has more or better sound absorbing boxes on a system. standard clio system are either two or even three boxes. can,t remember now. my system has two boxes. if your running a side exit you will prob need to get the normally rear box installed some where else in the system before the exit too keep noise levels sensible,

Dancliovalver
12-04-2007, 22:34
kool cheers dude i think i understand now, so if i get a standard valver backbox, chop some piping up, get the welder out, weld the backbox onto the piping and extend the pipe from the backbox to the side of the car?

MAXIBOY
12-04-2007, 22:40
yes. valver two box system fitted into the middle and fitted hangers then side exit it.

Dancliovalver
12-04-2007, 22:44
mint should sound pretty mint cheers maxiboy

MAXIBOY
12-04-2007, 22:45
:D

jay s
12-04-2007, 22:49
u lose power with side exit exh's, midge is going back to a std system because of this. someone else on here has also fitted one and lost power.... do sound good tho

Coops
12-04-2007, 23:36
Other Dan fitted one to his n all n lost power.

This Dan ( :P ) heres mine, single box tho so its a tad noisy! does sound mint tho. its hung on std hangars i think (there is one already on the bend on std clio centre section aint there?) if so its hung at that bend and then off std hangars on the chassis before std exhaust goes over axle, but in this case it hangs straight out the side! :lol:

http://i14.photobucket.com/albums/a330/coopahstar/Turbo/P3240098.jpg

http://i14.photobucket.com/albums/a330/coopahstar/Turbo/P3240099.jpg

Dancliovalver
13-04-2007, 10:21
thats loosk pretty simple dont it!!!

ill give it a crack and let u all knwo how i get on!! :lol:

2 live
13-04-2007, 11:33
takes about 5 mins to make a side exit....if u really take ur time lol.



http://img1.putfile.com/thumb/1/1005242333.jpg (http://www.putfile.com/pic.php?img=4486780)

Dancliovalver
13-04-2007, 11:38
lol what happened there mate?

2 live
13-04-2007, 12:53
new arch mate...tis all good now ;)



0051 i might add lol....none o that rusty arch shit on 0159 lol

DaveH
13-04-2007, 18:30
takes about 5 mins to make a side exit....if u really take ur time lol.



http://img1.putfile.com/thumb/1/1005242333.jpg (http://www.putfile.com/pic.php?img=4486780)

lol