View Full Version : Where to buy New Sills...
Amirclio
12-04-2007, 09:34
As above, want to get these done by the end of the summer. Question is where do i get them? How hard are the old ones to remove? How do i go about fitting the new ones?
Cheers
Amir
http://www.sel-imperial.co.uk/SelectPart-part?markid=617&modelid=209&makeid=29
sills are 23 quid each. you cut/remove the old sill with an air chisel/grinder. attach the new one buy welding clamp and once happy with the fit weld it in place. stonechip and then spray body colour.
Amirclio
12-04-2007, 11:36
Superb!
What do you mean my stone chip?
Amir
most renault sills have a white rough textured anti stone chip finish under the paint
http://www.kenteurope.com/uk/shop/viewfamily.php?viewfamily=9383§ionid=497&type=Auto
Amirclio
12-04-2007, 12:14
I get ya!
Tanks veyr much you have a been a real help!
Amir
in fairness to you Maxiboy you seem to have an answer to every question !
I will need to get these as well
Justin..
12-04-2007, 21:13
thyre no good for 16v though. unles you chop some off the lenght and bend them out
Amirclio
13-04-2007, 09:52
Why is that? Someone on here must have had new sills at some point lol!
Amir
think all 3 door sills are the same but will be easy to adjust the flair
Justin..
13-04-2007, 16:49
why are RSi side skirts an inch too long for my 16v then :? I no its not strictly the cill but the lenght shows otherwise
You can see where there is a distinct curve in the sills where they follow the flare of the arch. My old 1.2 was straight front to back, as said though, may be modify-able.
On another point didnt bish used to have rsi skirts on his old valver? Maybe he had to bodge them to fit.
Yeah, I just got some of those sills, look OK, but will see when it comes to fitting them.
As said, will need cutting to suit the flared arch.
Will let you know how I get on.
Justin..
13-04-2007, 18:58
You can see where there is a distinct curve in the sills where they follow the flare of the arch. My old 1.2 was straight front to back, as said though, may be modify-able.
On another point didnt bish used to have rsi skirts on his old valver? Maybe he had to bodge them to fit.
The skirts need modifying to fit, you have to cut an inch off the end.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.