PDA

View Full Version : setting the thottle posion switch



adam 006
07-04-2007, 20:12
how do i do this my car hops when running off thottle

summeh
07-04-2007, 20:29
Not sure if it can be done manually?

Take it to reno/specialist and they will plug a laptop into the diagnostic port and adjust it according to the reading... at least thats how mine was set up.

Scougar
08-04-2007, 00:57
On very light throttle my car bunny hops a bit now. Is a pain in the butt. Will fiddle with the TPS a bit to raise the revs. If you get it sorted, i'd be interested in knowing how reno did it, or at least how long and how much?

Might jubilee clip the 2 air running off the the back of the airbox as they seem to be a very 'loose' fit which might also cause probs...

Matthew

summeh
08-04-2007, 02:19
You could probably do it with a multimeter if you knew the correct resistance rating it should give for WOT.

Scougar
08-04-2007, 09:09
Strange it's not in the service manual? Does anyone have a renault workshop manual that can have a look if it's in there?

Matthew

VIPERONE
08-04-2007, 15:48
do a search, there is a guideon here t set the resistance values.

summeh
08-04-2007, 22:20
No I doubt it's in the workshop manual either, as reno would use a clip to set it up properly.

And according to the haynes book of lies (if I remember rightly), dealer only job, altho worth checking :D