View Full Version : nearside headlight air feed??
Dancliovalver
05-04-2007, 22:38
ok so now the clio is never to be back on the road in my own im gonna take out the nearside headlight to get some more air into the engine bay!!
is it still worth having a standard air box with replacment filter or would it be worth havin an open induction kit to get to the air straight away???
ur thoughts please :lol:
if your removing the headlight then look into something with a better sealed airbox. like a viper or bmc
Dancliovalver
05-04-2007, 22:47
i take it thats for rainy days lol
cheers mate, will put my airbox up for sale!!
well if your removing the headlight you want as direct feed as possible. something like a viper will have a larger more direct feed into the throttle body with clean cold air.
Dancliovalver
05-04-2007, 22:52
sounds good, does it make any difference at all other than slight weight lose lol :lol:
removing the headlight. not that much really just cool clean air an not low enough to suck in much water. about the same as a scuttle air feed i would think.
leaf blower mounted on the bumper or Henry in reverse mode :wink:
Dancliovalver
05-04-2007, 22:57
hehehe have u sen the video of iirc a mazda with a leafblower strapped to it, pretty funny lol
how much do stardard boxs go for these days??
or modded T25 on the exhaust.
or modded T25 on the exhaust.
aye just run a pipe round from the back of the car to the airbox - might not be cold by then buts its constant :D
Dancliovalver
05-04-2007, 23:06
http://videos.streetfire.net/search/leaf+blower/0/ab544e3b-5dff-416d-9cfd-a1ad23ca9564.htm
Numpties with the nos bottle like that.
VIPERONE
06-04-2007, 19:16
i would consider relocating the air feed to the washer bottle area, & moving the washer bottle to the rear of the vehicle. . . . which is easy to do.
get a throttle body adapter and fix some alloy tubing on to it...route it in to the washer bottle area.
job done.
VIPERONE
06-04-2007, 19:16
naturally fitting an i/k on the end lol
Dancliovalver
06-04-2007, 22:33
i would consider relocating the air feed to the washer bottle area, & moving the washer bottle to the rear of the vehicle. . . . which is easy to do.
get a throttle body adapter and fix some alloy tubing on to it...route it in to the washer bottle area.
job done.
my mate robbie has done this, he bought the hillpower one and it sounds awsome, he has also installed a Renault 19 bonnet scoop straight over the top of it lol
1995clio16v
07-04-2007, 21:09
i would consider relocating the air feed to the washer bottle area, & moving the washer bottle to the rear of the vehicle. . . . which is easy to do.
get a throttle body adapter and fix some alloy tubing on to it...route it in to the washer bottle area.
job done.
my mate robbie has done this, he bought the hillpower one and it sounds awsome, he has also installed a Renault 19 bonnet scoop straight over the top of it lol
Would like to see pics of this Dan if you can get?
Will a piper X fit into the washer bottle area or too big?
Dancliovalver
07-04-2007, 21:22
i would consider relocating the air feed to the washer bottle area, & moving the washer bottle to the rear of the vehicle. . . . which is easy to do.
get a throttle body adapter and fix some alloy tubing on to it...route it in to the washer bottle area.
job done.
my mate robbie has done this, he bought the hillpower one and it sounds awsome, he has also installed a Renault 19 bonnet scoop straight over the top of it lol
Would like to see pics of this Dan if you can get?
Will a piper X fit into the washer bottle area or too big?
sure mate will try and get a pic asap for ya, looks pretty good, he has left the vent black
1995clio16v
08-04-2007, 22:53
Nice one Dan, would be interesting to see.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.