PDA

View Full Version : two quick questions



JohnGordon
04-04-2007, 15:34
This is going to sound a little chavvy but I was wondering if anyone had ever drilled holes in the standard airbox? All I'm after is that lovely induction sound they make with an open filter on till I get something proper sorted. I need to drown out the chavtastic 9000 exhaust thats on there at the moment.


Also, I have been told that insted of welding the steering bush up you can simply crush the surounding metal and it has the same effect?


John

northy
04-04-2007, 15:43
i have a airbox that has been modified - i will get a picture tonight for you.

As for the steering column - i would only recomend welding it up.

simonr85
04-04-2007, 15:56
i will swap my K&N for an unmolested standard airbox if you want?

tobi_rsi
04-04-2007, 21:31
drilling holes wont do any damage, but could encourage heat soak from the bay, i drilled a 2" hole in my standard airbx, then have some 2" ducting ducted to behind the grill!! dont know how it sounds cos om my disgustingly loud exhaust, but it sure does suck like a beyatch!! an im hoping its getting quite alot of cold air to the box, dont know if its just me but the revs seem to pick up a hell of alot quicker since ive done the ducting!!

Tobi