PDA

View Full Version : Socket for removing oil level/temp sender from block



1fast6
04-04-2007, 10:53
What size socket is needed to remove this sender?

Thanks.

MAXIBOY
04-04-2007, 12:34
think you,ll need a spanner.

summeh
04-04-2007, 18:30
you wont be able to use a socket as the wires will get in the way. spanner it is.

Rajk
04-04-2007, 19:41
sorry if im being thick, are you talking about the one at the front of the engine? if you are the plug is a push fit type which comes out with a bit of wiggling and then you take out the front valance, the one that hold the rad in place and you the can move the rad quite freely without disconnecting it, deep 17mm or 19mmwith a few extensions and it will come out!! if your talking about the rear one you need a 17mm spanner and boney girl arms to get the thing out.