View Full Version : Dyno my clio
I dynoed today my clio with the help oF Gakisclio my car.This is a video from the dyno but the clio had too much power lose from the intake air as the dyno gives air as 50mph so the engine run extremelly rich about 11 to 1 ratio.So i beleive that in the road has slighty more power to show :wink:
http://youtube.com/watch?v=bYUfoEWKv_0
The guy you see is Gakis :lol:
Power figures dispite that problem were 250,1hp and 23,5Kgm of torque.
Ah and i was revving only at 8700 rpm and not more :lol:
Ah and i was revving only at 8700 rpm and not more :shock:
what can u safely rev it to ?
sounds sweet 8)
I was revving without problems at 9300 for a long time.So 9k easilly with these cams,otherwise i wouldn't use so wild set up.It would be useless :wink:
cliolord
25-03-2007, 16:38
what are the modifications :shock: :shock:
Laine_16v
25-03-2007, 16:42
Sick!
proper power, and those revs 8)
what are the modifications :shock: :shock:
Forged pistons (13.9:1 c.r)
forged rods
lightened crank
ARP head bolts
GrA oil pump
Custon cams (312deg with 12.5 lift)
Kent (Chokolate made :lol: ) pulleys
kent solid lifters
kent double springs
kent titanium retainers
8 RC injectors (370cc)
50mm throttle bodies
ported head
custom made exhaust manifold (43mm I.D)
uprated leads
uprated ignition coils
alloy shorter water radiator
decat exhaust system 60mm
remappable ECU
and i don't kno if i m forgettin anything else :D
yeah, same spec as mine :roll:
quality motor mate :twisted:
Very nice mate - non of your new gearbox ???
Very nice mate - non of your new gearbox ???
The dyno you see is with 6th gear from the 2k starting opening slowly the throttle and at the 5.5k i m pushing the throttle pedal to the metal :lol: :lol: :lol: i think you can hear it too.
Rich,i will try and get a video the soonest mate but as the speedo is not working the only thing you will see is tacho and gears. :roll:
Very nice mate - non of your new gearbox ???
The dyno you see is with 6th gear from the 2k starting opening slowly the throttle and at the 5.5k i m pushing the throttle pedal to the metal :lol: :lol: :lol: i think you can hear it too.
Rich,i will try and get a video the soonest mate but as the speedo is not working the only thing you will see is tacho and gears. :roll:
Good lad.
Tacho and gears is fine - aslong as your flat out ! :winkey:
Good lad.
Tacho and gears is fine - aslong as your flat out ! :winkey:
:lol: :lol: :lol:
sick as fcuk that! love this car! 8)
Mr.AdamB
26-03-2007, 19:42
me wanna see speedo vids...... madness
me wanna see speedo vids...... madness
I don't have a working speedo as my gearbox doesn't have an output got this....
9000 rpm on a standard williams crank?
I was revving 9.3k for over 2 years without problems :wink:
Ah and fault the degs of the cams.It is 320 and not 312.But we think that we would have better results if we use 320-12.5 in and 304-12llift for the ex but im afraid for power loss so im going to test it for now :lol:
thats cool then as the 1.8 unit should be stronger 10,000rpm turbo madness then.
GakisClio16v
27-03-2007, 11:52
This car is at leat 260Ps at the fly if we rev it about 9,200-9,300rpm!
Soon vids and VBox tests...
cliolord
27-03-2007, 17:55
god damn :P
VIPERONE
28-03-2007, 01:36
good god..
no use asking you to turn up to the local meet !!..
next footage we require is:
in car on the road with the sequential shifter
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.