PDA

View Full Version : Lots of holes/space at bottom of gearbox?



BristolSam16v
25-03-2007, 05:18
Just fitted a 19 16v box to the valver but couldn't fit any of the 4/5 bolts right at the bottom of the box as there was no bolt thread? The thread which i took out the old box was 2 big and wouldn't screw into the new 1 :( if you look at the bottom you can see the whole bottom of the flywheel :( take it this is going to cause problems?

Rich
25-03-2007, 10:44
cant be a 19 box pal, they fit fine

Clio_GTT
25-03-2007, 11:23
Maybe its an R5 box, you can see the flywheel on the R5 GTT's if you don't fit the bellhousing cover

BristolSam16v
25-03-2007, 15:02
Says JB3 etc on the metal plate? It looks like it could fit but the threaded bits at the bottom are a different size to the ones on my old box? Can I buy them somewhere??