PDA

View Full Version : Blag Wide Track



darrenm1eqn
20-03-2007, 17:05
Given the car a slightly wider front track 25 mm per side (50 mm in total) to
be precise with some hubcentric spacers

http://i125.photobucket.com/albums/p47/darrenm1eqn/ClioWilliams/PIC_0007.jpg


http://i125.photobucket.com/albums/p47/darrenm1eqn/ClioWilliams/PIC_0001-1.jpg

http://i125.photobucket.com/albums/p47/darrenm1eqn/ClioWilliams/PIC_0005.jpg


http://i125.photobucket.com/albums/p47/darrenm1eqn/ClioWilliams/PIC_0004.jpg

Will do until i sort me willy wide track out

northy
20-03-2007, 17:22
looking good mate - impressed with your progress on this since i came to see u !

darrenm1eqn
20-03-2007, 17:53
Cheers Fella :wink: Getting me M.O.T done in a few weeks dunno what
to do with the car if to sell and move on to something different or keep hold and go for cams or something , I get bored with cars easily lol

Andy P
20-03-2007, 21:09
Spaced it out nicely. Handle much different?

You need to get longer wheel nuts?

darrenm1eqn
20-03-2007, 23:36
Hi Andy

No there Hubcentric spacers which have 8 holes in . Basically the
spacer bolts on to the hub and the wheel then bolts to the spacer. So
you have 8 bolts in total on each wheel . There a lot safer than the usual
spacers that are basically a spacer disc with only 4 holes in with longer
bolts needed to install them..

These are a lot stronger and as you have to bolt the spacer to the hub
you dont suffer any wobble or vibration that you get on cheaper spacers..

You get shortened bolts with the spacers and then you use your original
wheel bolts to atach wheel to them ..

http://i125.photobucket.com/albums/p47/darrenm1eqn/phpBH415n_main_thumb.jpg

darrenm1eqn
20-03-2007, 23:40
As for handling , its made a small difference . Not much but enough to
notice 8)

1fast6
21-03-2007, 09:32
Looks good.

Where'd you source the spacers from mate?

darrenm1eqn
21-03-2007, 14:11
Here's the link for the Hubcentric spacers . Just pic what car you want
them for , mine were £52 for steel ones but you can get alloy ones for
an extra £20 i think it was

http://www.motorsportworld.co.uk/frame-detail.asp?PAGE=/manranges.asp

darrenm1eqn
21-03-2007, 14:16
When you get on the motorstortworld website , Goto the bottom and you
will see delta mics spacer click on their and select your car ...