View Full Version : whats BHP are you running?
simple really, as above, name what car you have and what BHP you have
i have a 92 valver running 152bhp
1.6 8v Astra LS Estate, running about 65Bhp at the fly.
williams 1 0159....170 ish
williams 1 0051...bout 200+ ish.
Laine_16v
18-03-2007, 11:19
95 Valver
114.3 ATW - 137 ATF, standard baby!
darrenm1eqn
18-03-2007, 11:26
1994 Valver 87000 Miles Running around 150 BHP
Clio Cup Group n Chip
Magnex System + Decat
Viper Induction Kit
Advance Ignition Module + 6 Degrees
Running 99 Ron fuel
clio 172 - id like to say 180ish but i dont know
Clio 1.2 Ph3- Running...................
65BHP :wink:
Danny-ACE!
18-03-2007, 12:36
94 Hybrid
151.3 ATW
Dont know what it would be at the fly?
Danny-ACE!
18-03-2007, 12:43
94 Hybrid
151.3 ATW
Dont know what it would be at the fly?
AGGGHHHH!!!! ITS SO GAY NOT HAVING AN EDIT BUTTON :whip:
Its a 93 Hybrid! :D
'94 1.8 16v turbo
217 atf
Bloody Hell Coops!
Whens the Race With Martin? :wink:
16v_russ
18-03-2007, 14:23
2001 172 std so about 169 bhp
darrenm1eqn
18-03-2007, 14:26
'94 1.8 16v turbo
217 atf
Bet that shifts :shock:
RS-Steve
18-03-2007, 15:01
focus about 260-270 but not been rr'd recently
cliolord
18-03-2007, 15:28
Estimation 180hp atf 92 hybrid
I estimate my hybrid at 140ish atf..
full magnex + decat
F7R b/e, 1.8 head
Pipercross induction
1.8 superchipped ecu
clio turbo. will be at least 300bhp this time maybe more. [-o<
holy crap, how do you plan on getting that power down?
I estimate my hybrid at 140ish atf..
full magnex + decat
F7R b/e, 1.8 head
Pipercross induction
1.8 superchipped ecu
erm it should be 150 bhp stnd :?
lsd very wide track coilovers 225/30 18,s.
sweet :D
Martin - would it make 150bhp on a standard 1.8 head though? My mates with a similar spec to mine made 150bhp but his is cammed.
yeah it will do...
there must have been a problem with your mates, ona 1.8 head with cams, depending on spec of course, you would be looking at maybe 160bhp.
Mines to be announced :wink:
cliolord
18-03-2007, 16:23
yeah it will do...
there must have been a problem with your mates, ona 1.8 head with cams, depending on spec of course, you would be looking at maybe 160bhp.
Mines to be announced :wink:
what a bloody beast that will be!
**** sake.
Anyone wanna sell me there fast Clio Hybrid for £2500? :D
cliolord
18-03-2007, 16:44
Put one together fin ;) the HYbrid crew :lol:
Lol.
It is tempting and with the 172 Cup fund could probs make/buy a nice one.
BUT, I don't think I can go back to rusty arches, creaks and rattles, leaky sunroofs, cold fans and dodgy gearboxes :)
That's why I'm getting a 172 ofc :D
carlisleboy
18-03-2007, 17:03
93 valver with a few bits and bobs, was rr'd at 141 atf b4 a got it, dunno what it is now really maybe just over that
172 with a few mods
240bhp
193lbs/ft
172 with a few mods
240bhp
193lbs/ft
A few ._O
Lol.
It is tempting and with the 172 Cup fund could probs make/buy a nice one.
BUT, I don't think I can go back to rusty arches, creaks and rattles, leaky sunroofs, cold fans and dodgy gearboxes :)
That's why I'm getting a 172 ofc :D
lol..and u think a 172 will solve these probs??
you have a lot to learn my young friend lol.
Lol.
It is tempting and with the 172 Cup fund could probs make/buy a nice one.
BUT, I don't think I can go back to rusty arches, creaks and rattles, leaky sunroofs, cold fans and dodgy gearboxes :)
That's why I'm getting a 172 ofc :D
lol..and u think a 172 will solve these probs??
you have a lot to learn my young friend lol.
well to be fair they aren't rusting 'yet', dont have sun roofs and the boxes are deffo stronger (bolt in diff)... creaks and rattles though... you wont be escaping those! My ownership so far of 172's says to me it's about £10k+ more reliable so far ;)
the 172 cups ive replaced gearboxs on have had the same circlip style diff as williams/16v etc
these are cars which the box has been changed under warrenty and there first box change!
Fusionrs
18-03-2007, 19:11
94 clio 16v (soon to be tuned hybrid on TBs) - hoping 200ish
00 saxo VTS - about 135bhp
Clio 17s ph2 (standard) - probs about 160 ish id guess!?? Doesnt feel 172bhp 'fast'.
std Clio 182 so 170bhp :lol:
Elise s1 118bhp yer baby 8)
bit of a down grade from he old clio "Audi Hybrid"
279bhp... but them days are gone :(
but my new project will dick on it :P
133 - ATW 166 - ATF
staright thru devil zorst,magnex decat,itg replacement panel filter.
1995 williams 3 just over 100k on the clock :D
138 lbs/ft
172 with a few mods
240bhp
193lbs/ft
What rolling road was that on mate?
donsrno1
18-03-2007, 20:38
when is the engine your building going to be ready stan?
Is it going to be forced induction or N/A?
Mines NA.
will be ready about 2 weeks after I start it lol. Its currently in bits after stripping it down to upgrade.
So it should be pushing at least 210+Bhp if I'm on the right lines :lol:
it was making just under that last time, at 6600rpm...the rev limit was at 9000rpm!
valve bounce stop it revvign to full limit...which was mightily disappointing.
this time the valve-train has been revised, and wilder cams than before.
david932
18-03-2007, 23:19
it was making just under that last time, at 6600rpm...the rev limit was at 9000rpm!
valve bounce stop it revvign to full limit...which was mightily disappointing.
this time the valve-train has been revised, and wilder cams than before.
:shock: :shock:
david932
18-03-2007, 23:23
williams 2 157bhp atw 192bhp atf
classic mini 1380 104bhp atf
mazda 323 :oops: 75 ponies
205gti 1.6 circa 110bhp atf altho building a gti6 engine for it circa 190bhp atf
david932
19-03-2007, 01:11
clio turbo. will be at least 300bhp this time maybe more. [-o<
:shock: HOLLY SH*T!!
U thought about boost and lauch control.. ur gonna need it!
NLRG - williams 3
Hill Power
132.0 bhp atw (corrected) (146.5 observed power)
106.6 Torque @ 6500
172 with a few mods
240bhp
193lbs/ft
What rolling road was that on mate?
Ric Woods one
it was making just under that last time, at 6600rpm...the rev limit was at 9000rpm!
valve bounce stop it revvign to full limit...which was mightily disappointing.
this time the valve-train has been revised, and wilder cams than before.
stan, whats the spec of the bottom end ?
cheers
Lightweight fillet-rolled crank (all dynamically balanced), lightweight fly, Catcams H-section rods &high tens bolts, Accralite forged pistons.
classic mini 1380 104bhp atf
Cool! What's the specs on the engine? Does it keep up with the Williams?
david932
19-03-2007, 18:43
classic mini 1380 104bhp atf
Cool! What's the specs on the engine? Does it keep up with the Williams?
its a swiftune built engine in road rocket spec, stage 5 big valve polished and ported head, 1.5:1 roller rockers, fully lightened and balanced, omega high comp pistons, aldon ignition with a straight cut box, up to 60-70ish it on par with the williams. it top's out at 110 tho
sounds amazing and is very addictive to drive but were gonna be parting company soon to fund my 205 project :cry:
Clio_GTT
19-03-2007, 19:21
the 172 cups ive replaced gearboxs on have had the same circlip style diff as williams/16v etc
these are cars which the box has been changed under warrenty and there first box change!
Mk1 172 box
http://i51.photobucket.com/albums/f360/Clio16v-widetrack/172-1.jpg
Mk2 172 box
http://i51.photobucket.com/albums/f360/Clio16v-widetrack/172-2.jpg
That bolt in retainer can be retro fitted to circlip boxes.
Clio_GTT
19-03-2007, 19:27
That bolt in retainer can be retro fitted to circlip boxes.
oooh, do elaborate :D
could the retainer be stole from a newer non RS model ?
yes....theres a bloke near me who rebuilds boxes...he collects the retainers from scrap boxes, and fits them to all rebuilt ones, whether its circlip or not.
i guess its just a case of drilling and tapping to suit.
Clio_GTT
19-03-2007, 19:45
yes....theres a bloke near me who rebuilds boxes...he collects the retainers from scrap boxes, and fits them to all rebuilt ones, whether its circlip or not.
i guess its just a case of drilling and tapping to suit.
Any idea how much he would charge for such a service ? Do you think a bolted diff JB3 would be as strong as a JC5 ?
The bearings are different in the JC5.
no idea what he would charge. A local machine shop could do it if you shouldt ehm what u wanted.
VIPERONE
19-03-2007, 20:43
i was told that bell housing adapters can be fitted thus enabling other makes of box to be fitted to f7 series
@ willy lover, it was a 172 cup, both boxs the old one and new one from reno was diff circlip fitting, not bolt type as said
GakisClio16v
20-03-2007, 10:18
93 Valver, 156Ps at the flywheel
willyturb0
20-03-2007, 12:08
williams 2 turbo
242atw
275atf
williams 2 turbo
242atw
275atf
well lets see some pics please. and specs.
I'd actually like to know what Stromba's car is running as I hear he's been slating Martin and Gaz's cars? Anyone know the spec?
I'd imagine it must be one fast car to call something that will blitz an M3 'slow' lol
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.