Cold air feed position?

[mk1 clio]

Hi guys,

just a wee question,

I fitted my Cold Air Feed yesterday to the standard airbox, wanted to keep my fogs so aimed to use the space beside the passenger fog.

Anyway came to cutting it to length, and sort of guessed the length as you cant get it up towards the hole in the bumper without cutting it.

Thought id left plenty extra but turns out its probably a little short, it sort of heads off at an angle. :(
Fixed it in place, but was wondering if it will still do the job, or will it not be getting the air the same now? Few pics below:

Ohh and yes i know i need new fogs! :lol: Any suggestions for which? Yellow or clear?

Also are there any ducts about roughly the same size as the gap beside the fog? I only seem to be able to find ones that are much too big. :(

3" cold air feed fitted to airbox:
http://i25.photobucket.com/albums/c53/coolfire_99/NEW%20CAR/P3140002.jpg

standard bracket cut away:
http://i25.photobucket.com/albums/c53/coolfire_99/NEW%20CAR/P3140004.jpg

Feed:
http://i25.photobucket.com/albums/c53/coolfire_99/NEW%20CAR/P3140009.jpg
http://i25.photobucket.com/albums/c53/coolfire_99/NEW%20CAR/P3140015.jpg

[Clio_GTT]

Looks fine where it is mate

[Coops]

ai be reet, i have the same set up and its forever slipping from over the gap but to no real loss of performance! 8)

[Mr.AdamB]

looks liek it wll do the job. but id rather use fog hole with a scoop to ram air in there. works a treat on my vavler....

[mk1 clio]

good good, cheers guys!

Do anyone use a duct in this smaller gap beside the fog light? If so were can they be got from?

Cheers.