PDA

View Full Version : torque setting for kent cams vernier pulleys



MAXIBOY
15-03-2007, 19:14
any idea. 10 nm 12 nm

cliolord
15-03-2007, 19:19
i think mine were 50nm on cam cams pulleys (the pulley to cam bolt yes?)

MAXIBOY
15-03-2007, 19:27
no the bolts on the verniers please.

stan
15-03-2007, 19:40
around that yes.

most stuff like that I do by feel.

MAXIBOY
15-03-2007, 19:41
cheers again stan. its together. dyno time.

stan
15-03-2007, 20:48
:D

stevie_b
15-03-2007, 21:11
Kent say 10-12 lb ft (13.5 - 16 Nm). You've got uprated stainless steel bolts rather than the weaker black ones that normally come in the pulleys, have you?

MAXIBOY
16-03-2007, 00:03
yes mate cheers for that. still found a problem tonight with the bolts just catching the head on the exhaust pulley. could off been fatal when things got warm. had to remove the pulley and grind away the head a little.

DaveH
16-03-2007, 00:07
:shock: Lucky you spotted that mate, is it finished now?

MAXIBOY
16-03-2007, 00:08
yeah its all together just got to get some dyno time now.

DaveH
16-03-2007, 00:11
Ah right, pics? Is it going on an engine dyno?

MAXIBOY
16-03-2007, 00:16
can,t do pics at the moment as my camera is refusing to get on with my computer. was alright the other day then refused to work. there,s pics here

http://clio16valver.circlehosting.net/forum/viewtopic.php?t=2932

up till just before i fitted the head.
yes just trying to sort dyno time as i,d like to run it in, tune it, make sure it does was it says on the tin and then fit it.

big hp
16-03-2007, 00:23
Looking good.

What sort of power you hoping for?

MAXIBOY
16-03-2007, 00:29
between 350 and 400 bhp if its driveable. trying to get a few maps done.

DaveH
16-03-2007, 00:34
Crazy power. What turbo is that using?

MAXIBOY
16-03-2007, 00:40
modified t28 done buy bb. meant to be good for 400 ish without to much lag.

DaveH
16-03-2007, 00:52
Yeah is that the same turbo that they used on the small turbo escort cosworth, they were supposed to be limited when taken up to big power (for a cossie) but were a lot more driveable due to being fairly lag free.

stan
16-03-2007, 00:55
wheres it being dyno'd mate? Carmarthen?

MAXIBOY
16-03-2007, 00:58
yeah well i,d like big power but only with drive ability. if,s it not i,ll detune till it,s all drivable and fun. it,s my road car not a track or strip weapon so peak power not really important (well except in the pub) it,s all about the drive really. hoping to be able to run in car switchable maps so i can have more power if i want it.

wavy
16-03-2007, 01:25
between 350 and 400 bhp if its driveable. trying to get a few maps done.
:eeek: your engine build pics are awsome 8)

MAXIBOY
16-03-2007, 01:38
wheres it being dyno'd mate? Carmarthen?

not sure yet talking to a few people.

stan
16-03-2007, 01:43
Im not even sure I know of anyone who has a "tidy" set-up round here tbh.

MAXIBOY
16-03-2007, 01:49
yeah its not just the set up but the loom ecu hoses etc. as no one does a lot of renault its difficult to find anyone thats willing to take it on. but i,m talking to a few people so fingers crossed