PDA

View Full Version : What chip?



stevie g
13-03-2007, 11:42
Running willy engine + box, anyone recomend a good chip, car is atandard apart from decat and full stainless
cheers :o

J o n
13-03-2007, 12:06
wow, you're not 'THE' Stevie G are you?

anyway, Gunnerchip for basic mods, cheap and very effective. If you get cams then Wayne Schofield at Chip Wizards, then if you go completely mental and get ITB's then Andy at GDI to map it on OMEX standalone

simonr85
13-03-2007, 12:15
where can i get a gunnerchip and how much? are they fitted or is it a DIY jobbie

MAXIBOY
13-03-2007, 12:17
off GUNNER on here. its a diy jobbie but theres also people that fit them on this forum. think gunner can fit them.

J o n
13-03-2007, 12:33
yup, as Maxi says, PM .GUNNER. and speak to him about them. They are very very well priced and require some soldering skill to fit, but I'm sure he can fit them for you

simonr85
13-03-2007, 12:42
will do, what sort of gains can be had with this chip and can the ecu be easily put back to standard?, my willy has just a straight through exhaust,

J o n
13-03-2007, 14:04
not sure on gains, you'll notice it though that's for sure. power through the revs goes up, so a peak bhp gain can be misleading. it will deffo be a noticable to big improvement

simonr85
13-03-2007, 14:25
will my ECU be able to be put bk to standard? or will i need a brand new ECU if i wished to do that?

MAXIBOY
13-03-2007, 14:27
yes a long as you keep the old chip.

simonr85
13-03-2007, 14:29
so its basically an exchange part, i dont want to f*&% up my ECU, so if i dont like the gunnerchip i would want to put it back at no cost and very easily.

Can somebody in NW fit 1 for me? name your price

MAXIBOY
13-03-2007, 14:48
you can fit a chip block in so you can swap chips without soldering.

stevie g
13-03-2007, 16:45
wat you mean im i The stevie g?? lol
cheers for advice will pm gunner

AmDaMan
25-04-2007, 09:17
Will a gunner chip work on a 1.8/F7R hybrid? Can't seem to get hold of Gunner!

I'm currently using the a 1.8 16v ECU that's superchipped.

Andy P
25-04-2007, 09:50
Will a gunner chip work on a 1.8/F7R hybrid? Can't seem to get hold of Gunner!

I'm currently using the a 1.8 16v ECU that's superchipped.

You'll need a Willy ecu then chip that mate.

drsmith1979
25-04-2007, 20:48
check out my guide so you can see whats involved. its very easy to revert back to your standard chip as you only solder in the chip carrier, so its a simple plug and play once its been done properlly..... that is unless you do what i do and butcher the biatch out with a dremmel! haha

http://www.williamsclio.co.uk/forum/viewtopic.php?t=19574

AmDaMan
26-04-2007, 21:23
Will a gunner chip work on a 1.8/F7R hybrid? Can't seem to get hold of Gunner!

I'm currently using the a 1.8 16v ECU that's superchipped.

You'll need a Willy ecu then chip that mate.

why's that mate? Does the gunner chip not fit the 1.8 ecu then?

If not i think i'll go for this one:

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&sspagename=ADME%3AL%3ARTQ%3AUK%3A1&viewitem=&item=160108635814&rd=1

AmDaMan
27-04-2007, 16:38
ordered the chip for my spec and 97ron fuel
wonder how it goes!