PDA

View Full Version : ECU's



Andy P
05-03-2007, 20:04
Just to clarify...

Will a willy chip fit a valver ECU?

i.e if i were to buy a chip off gunner and slap it in my valver ecu would it run? :lol:

cheers

number1
05-03-2007, 20:18
I wanna know this too, ive heard on this forum somewhere it does, but wanna clarify..

Dave

stew
05-03-2007, 21:56
90% sure it would. mine is an early phase 1 valver ecu with a hillpower chip. works great imo.

Andy P
05-03-2007, 23:19
90% sure it would. mine is an early phase 1 valver ecu with a hillpower chip. works great imo.

But is that a valver or willy chip? :wink:

bass_direct
05-03-2007, 23:32
willy chip..

number1
06-03-2007, 19:45
so surely a williams chip will go in a valver ecu??

stew
06-03-2007, 20:32
yeah sorry thot it was obvious,

valver ECU

hillpower stage 1 williams chip

cliolord
06-03-2007, 21:14
yes it would run.....williams ECU would plug straight into a valver loom but why would you do this? Has the ecu been mapped or something? You will get a poo limiter in a valver :shock:

Clio_GTT
06-03-2007, 21:16
yes it would run.....williams ECU would plug straight into a valver loom but why would you do this? Has the ecu been mapped or something? You will get a poo limiter in a valver :shock:

I'm pretty sure it's for a 16v running an F7R engine

Andy P
06-03-2007, 21:19
Basically its going to become a hybrid, both mine and Daves.

So need to either chip the valver ecu or get a Williams ECU. This is the way it works as ive been told.

Sticking a Williams chip in a valver ECU wont go, so ive been told.

So Stew, you might want to check that out mate

stew
06-03-2007, 22:41
i have the reciept from nick @ hillpower right here.

says williams stage 1 chip for 16v ECU

unless somewhere when mine was turned into a hybrid the loom was changed to williams loom as well. but clocks and all are still 16v items.

number1
06-03-2007, 22:55
are the looms not the same?? time to email hillpower me thinks!

Dave

Andy P
07-03-2007, 18:44
Yeah otherwise i have just made an expensive mistake :roll: :lol: