PDA

View Full Version : Urgent - Map Sensor Pipe / Inlet Manifold



BRUN
02-03-2007, 22:16
the pipe fixing that is on the end of the manifold on my car snapped off ages ago, i fixed a pipe connector onto the hole using chemical metal

however, every 6 months or so this comes off and the car obviously runs funny until i sort it

what im wondering is, can i block off the hole, and use one of the manifold to rocker cover breather pipe connections instead ?

maybe put a crank breather on the rocker and run pipe from the top of the inlet manifold to the Map sensor

im stuck in Wigan at the moment trying to glue it back on so i could do with some replies asap !

MatBrown
02-03-2007, 22:31
I'm not sure mate.


Mat.

stan
02-03-2007, 22:46
Block it of, and connect the map pipe to the nipple for the vapour solenoid (ditching the vapour set-up).

BRUN
03-03-2007, 09:22
thanks