Wheel Bearings Source

[J_A_R_B]

When can I can I get wheel bearings for my williams in particular rear ones

regards

James

[MAXIBOY]

gsf http://www.gsfcarparts.com/

[MattyH16valver]

As above....I got one from there....very good price too. You will have to get the old one pressed out at a garage though as u need over a ton on pressure! :shock: Matt

[1995clio16v]

Just buy a new rear disc mate, it's far easier and less stressfull, less time consuming etc.

That's what I always do.

[J_A_R_B]

Just buy a new rear disc mate, it's far easier and less stressfull, less time consuming etc.

That's what I always do.

Getting new discs hence why I'm replacing the bearings as from what I have read best not use old bearings. Does anybody have a gsf part number for bearings and discs or ones pre pressed in couldn't find anything on there.

[MAXIBOY]

R41304 WHEEL BEARING-REAR CLIO 16v/ABS DISC BRAKES 13.44

[J_A_R_B]

are the GSF ones any good from peoples experiences?

[MattyH16valver]

seemed ok to me m8.

[Swervin_Mervin]

Is it not easier to just get the pre-pressed ones from \renault?

[MattyH16valver]

Renault Rear disks with pressed bearings are'nt that badly priced.

[drsmith1979]

£56+VAT i think for rear discs with pre pressed bearings

[Rich]

it works out cheaper to get them from renault with bearings pressed in already :wink:

[BRUN]

yup, get them from Renault

[arj256]

are the GSF ones any good from peoples experiences?

I just got some rear discs and bearings from gsf and they seem good.
Worked out cheaper to buy the bearings and discs from gsf and get them pressed in.
Think it worked out around £100 where as its something like £150 from renault (both discount prices).

[Swervin_Mervin]

its something like £150 from renault (both discount prices).

Get out of town! I need to ask tomorrow as the bearings are shot on PCC