View Full Version : Wiring in a manual fan switch . . .
come on the kids hows it done, looks like im going to be needing one. diagrams would be helpful. thanks
where your plug for the switch goes on your radiator, take the plug out.
Run a wire from each of the terminals to a switch in the car. done.
I had one for when I was going to be thrashing the car, worked well :)
cos my fan only comes in when ignition is off
MatBrown
25-02-2007, 14:39
cos my fan only comes in when ignition is off
Sounds like the fan switch is faulty and your anti-perc system is coming in.
Mat.
as above. can,t see the point in a manual override just one more thing to have to keep an eye on.
my williams is wired up to work as std and i can over ride it with the flick of a switch!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.