PDA

View Full Version : Wiring in a manual fan switch . . .


Riley
25-02-2007, 00:52
come on the kids hows it done, looks like im going to be needing one. diagrams would be helpful. thanks
MAXIBOY
25-02-2007, 02:01
why.
AmDaMan
25-02-2007, 14:05
where your plug for the switch goes on your radiator, take the plug out.

Run a wire from each of the terminals to a switch in the car. done.

I had one for when I was going to be thrashing the car, worked well :)
Riley
25-02-2007, 14:17
cos my fan only comes in when ignition is off
MatBrown
25-02-2007, 14:39
cos my fan only comes in when ignition is off

Sounds like the fan switch is faulty and your anti-perc system is coming in.


Mat.
MAXIBOY
25-02-2007, 14:43
as above. can,t see the point in a manual override just one more thing to have to keep an eye on.
richy
25-02-2007, 14:56
my williams is wired up to work as std and i can over ride it with the flick of a switch!
MAXIBOY
25-02-2007, 14:59
best of both worlds. :)