View Full Version : Clio valver - drive shaft prob
robmorris
11-02-2007, 14:45
Gday
Hopefully you guys can help?
I bought a new (second hand) hub and drive shaft...
Got it all apart, no probs...
But now the (driver side) drive shaft wont come out?
Im told with a tug it should come?!!?
ive tugged, pulled, pushed and hit.......nothing!!!!
What am i doing wrong?!?
also what torque should the big nut at the end be to??
Cheers Rob!!
have you undone the nut etc. are you trying to remove it from the hub end or completely from the car. have you removed the hub bolts. if its just stuck in the hub put the nut back on the end of the threads and give it a clout
robmorris
11-02-2007, 14:51
everything is off the car.
Just a floppy drive shaft to pull out from the gearbox?
Clio_GTT
11-02-2007, 14:58
HAHA, have you got the rollpin out ?
there is a rollpin that keeps the driveshaft on the sunwheel, knock it out and the shaft will come off the car
robmorris
11-02-2007, 15:00
darn
ok so that does need to come out (didnt know what it was)
ive tried knocking it out, it wont budge!!
safe to drill out? can i go all the way though?
Clio_GTT
11-02-2007, 15:01
http://i51.photobucket.com/albums/f360/Clio16v-widetrack/Picture045.jpg
Clio_GTT
11-02-2007, 15:04
It should come out, they're only a rollpin, get the right size punch and it'll come out easy, try WD40
You could drill it out, its a uniform diameter but try knocking it out first.
You'll need a new one to refit the driveshaft if you drill it out but they're only a couple of quid from renault
robmorris
11-02-2007, 15:04
thats the biatch!!!
cheers fellor, il have to give that another go...
Clio_GTT
11-02-2007, 15:06
thats the biatch!!!
cheers fellor, il have to give that another go...
with all the pulling you've been doing, you might have bent it or made it tighter, knock the shaft back on slightly and try and punch it out then.
robmorris
11-02-2007, 15:08
good advice, i reckon i will have to..
thanks again
Rob
VIPERONE
11-02-2007, 18:31
remove roll pin then apply the FBH on the shaft
The big nut on the end?tighter than a nuns fanny!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.