View Full Version : Megan 710
AndyFielder
11-02-2007, 00:28
Hi all,
What machining would be required on one of these to put it into a valver?
I understand it needs machining for the distributer... Is it more than a hole?
Could i not use the ignition systems out of a megane to save all this fussing, and put a better engine than the willi one into a valver?
Faster stock than a willi engine?
Andy
waste of time tbh mate.
use the meggy bottom end by all means.its all good.
but.use a valver head....or a willy 1 if u can get 1.
AndyFielder
11-02-2007, 00:30
Bass informs me bigger valves in the megane.. bigger valves, sounds quicker to me!
yes they have bigger valves....they also have a diff manifold, throttle body, port shape etc etc etc.
for the hassle its not worth it. if u want bigger valves.put the valves out of the megane head in a valver head.
AndyFielder
11-02-2007, 00:42
tbh, that does sound simpler, im assuming, enlarging the valve guide holes...
new valve guides, valves and drilling out/grinding the valve seats.
its all true :D
and yes, theres more to it than machining dizzy. you could re-wire the whole car to run the meg lump..but whats the point?
std for std..they will be circa the same performace. you may aswell use bottom end, 1.8/willy head, and a set of tidy cams.
bass_direct
11-02-2007, 01:11
and a turbo :)
turbo's are for pussy's :twisted:
AndyFielder
11-02-2007, 10:14
lol, now now boys!
cliolord
11-02-2007, 15:20
hahaha turbo is cheating :lol:
yeah but got fed up with little amounts of power. plus i think mine is a sleeper. everybody thinks its a body kitted 1.2. 400bhp here we come.
VIPERONE
11-02-2007, 18:17
i'm going to run mine at about 220bhp.. and remove the boost controller.
wouldnt be fair on the box and clutch
bass_direct
11-02-2007, 20:41
same here, mine should be around 220bhp :) hopefully end of april.. it shall be complete! 60% complete 8)
220 bhp with a blower thats lame :wink:
Innit though *accent of that cockney girl from Little Britain*
220 with a turbo.......u fukkin wanker pussy arsed mother fukker ;)
got a dump valve innit! :lol:
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.