scoobs
30-01-2007, 21:57
I have a 1.2 with a knacked engine.
Looking for possable upgrades. This is my first clio so i am not clue'd up on everything yet. Honda's are my main pleasure. :D
Anyways,
I have a P reg, Mk1 Phase 3 Clio, with a 1.2 8v engine.
Looking into a 1.8 or a 2.0 engine swap. (valver or willy engines)
Been doing alot of searching and came up with this, but i need some help on some things.
Parts needed :
*Engine, ECU, Harness
*Mounts inc Dogbone
*Fuel Pump
*Brakes, 1.2's might be too small :wink:
*I have been told i need the 16v suspension, but i have also been told, since my clio is already lowered, the springs i have should cope with the extra weight?
*Valver/Willy driveshafts, But been told my ones would do?
* I will use the Valver/Willy gearbox, unless you can sugest a better one?
If someone could confirm if i am right or wrong that would be great. Cheers
Looking for possable upgrades. This is my first clio so i am not clue'd up on everything yet. Honda's are my main pleasure. :D
Anyways,
I have a P reg, Mk1 Phase 3 Clio, with a 1.2 8v engine.
Looking into a 1.8 or a 2.0 engine swap. (valver or willy engines)
Been doing alot of searching and came up with this, but i need some help on some things.
Parts needed :
*Engine, ECU, Harness
*Mounts inc Dogbone
*Fuel Pump
*Brakes, 1.2's might be too small :wink:
*I have been told i need the 16v suspension, but i have also been told, since my clio is already lowered, the springs i have should cope with the extra weight?
*Valver/Willy driveshafts, But been told my ones would do?
* I will use the Valver/Willy gearbox, unless you can sugest a better one?
If someone could confirm if i am right or wrong that would be great. Cheers