PDA

View Full Version : bulbs for the dials



NAPLES VALVER 123
05-01-2007, 17:27
whilst im taking the dash out im going to replace all of the bulbs, as alot of them have blown. The big ones are fine as they are side light bulbs. but the other smaller ones im not to sure. see picture:
http://img.photobucket.com/albums/v721/shanehandley/DSC00163.jpg

the bulb in the middle is from the right hand side bulb holder this is fine as they are simular to the sidelight bulbs but smaller. the bulb on the left though is completly different the bulbs dont come out and the filment is fitted directly to the metal part of the bulb holder. so does the whole bulb and holder have to be replaced if so where do i get them from.

thanks for your help

big hp
05-01-2007, 17:54
Yes whole bulb and holder has to be replaced, any motor factors will sell them.