View Full Version : URGENT HELP!!!!
hi all
i have a slight problem...leaking sunroof has made my immobilser go a bit nuts..and now wont lock.or open
this means i cant start the car...any way to disable it!??
jules
clowo16v
30-12-2006, 18:01
Should be a key hole under the dashboard on the passenger side I think.
Matt
Take the chip thingy out byt eh sunroof and dry it off, and then lock the car manually till its dry
You pretty screwed TBH
Get drying it all out :oops:
IIRC the button on the pass side stalk is sumat to do with the imob but **** knows what lol
You pretty screwed TBH
Get drying it all out :oops:
IIRC the button on the pass side stalk is sumat to do with the imob but f**k knows what lol
Its called a horn :roll: :lol:
dunno what went on there... :?
right ive got the thing out...the whole top bit and its just hanging there now...randomly locked...and opended then wudnt do anything...so what do you sugesst i do
just wait.....and see what happens
btw its on a 1997 ph3 1.2...
anyone no anything about the key under the dash jobbie?
You pretty screwed TBH
Get drying it all out :oops:
IIRC the button on the pass side stalk is sumat to do with the imob but f**k knows what lol
Its called a horn :roll: :lol:
DERP!!!!
The other stalk :oops:
Take it out, wires shoudl pull off the back and take it inside and dry it all out, put it in airing cupboard etc and dab it with bog roll
Just lock the car up manually with the key for tonight
Fob only dude ...real ghey!!!!!
key in glove box is Ph1 only
As above take it in the house to dry out
what you just push it in a different way or somthing?
any more help would be greatly appreciated...read my last post
I have a switch to the left of the fuse box which supposibly operates the imobiliser.....and winston my ph2 RSi had a lock in the glovebox :P
what you just push it in a different way or somthing?
any more help would be greatly appreciated...read my last post
As i said above......take it in house and dry it out and lock car up manually for tongiht
would do...but 2 things...
i need to drive tonight....and
if i do want to take it out....the 2 wires at the bac just pull off?
This is a PH3 tho ;)
Early ph2's have them still like L and M's ...Nreg is Ph3 style
Get it banged on the rad for an hour or 2 before you go out??
Other answer is get a ph1 RT ecu
reg of my RSi was N880 ETP
just had a look around the fusebox and cant see much that looks like ajey thing...or anywhere to put a key...just randomly unlocked when i press the button...
so could it be somthing else??
goin to get new batterys now and try that.,.
**** knows ....**** Reno ...**** everybody!!!!
That key turns the alarm off not the imob ...just remember'd ................my comments still stand :P
my mk1 ph3 1.2(bug eye) doesn't use the crappy old style plip's to disarm the immob, it has the newer chip in the key, and a decoder ring on the key barrel, just put the key in and it detects the chip to authorise the immob to disarm
yup just take the whole thing off and dry it, used to happen to mine when the roof leeked
VIPERONE
31-12-2006, 04:30
take the ir sensor circuit board from your car, you will see 3 ir diodes, look underneath where the legs are soldered on...you should see blue/green corrosion, lightly remove it with a pin and reassemble unit.. it should then work.
sorted it!!
all it needed was a good dry!
cheers for the help everyone:)
Glad you got it all sorted :)
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.