help needed

[GIDDY]

HI can anyone tell how and how much and where to get an imobiliser fixed seen a 1.8 16 valve but this problem needs fixig any help or advice welcome thanks

[MatBrown]

If it's a standard immobiliser just fit a ph1 ECU.



Mat.

[VIPERONE]

before you do that..... try this:

remove the ir plip sensor from the roof, and then take the pcb from it... you will notive 3 x ir sensors, look on the underside of the board the connections may have corroded and be blue and green...scrape it all of carefully reassemble and hey presto