PDA

View Full Version : DEVIL


evouk
18-12-2006, 19:54
Do DEVIL still make the exhausts fro the clio mk1?

If so who supplies them in the UK and any ideas on costs?
northy
18-12-2006, 19:58
yes - but you carnt get them in 'cup' style from the early ninties.
Lee Keefy
18-12-2006, 20:06
you can get them from auto motif in manchester.

automotif.co.uk

Give them a ring tho, as their site is mainly bike race can's, they are however a main dealer for Devil exhausts and can get car ones for you as a special order.

I have bought one from there previously for a car.


:lol:
fab
18-12-2006, 20:09
I called daemon tweeks and they advised they aint dealing with Devil anymo.
Dont know who else supplies in the uk but you may wanna try devil.fr which basically tells you to buy from them direct.give them a call and they tell you they only export to trade cus only :?

Best bet is reichard motorsport,sound,cheap prices and the link is on the front page of the website.
:wink:
evouk
18-12-2006, 20:33
i see so thats why everyone is after devil exhausts off mk 1's

Is the cup race car one a specialy made one or the same as the road version
richy
18-12-2006, 20:36
its a different system to road cars mate, you could only get them through reno iirc but there not available no-more!
northy
18-12-2006, 20:37
no its a all steel race exhaust mate. The Road ones everyone wants had a 3" rolled tailpipe in stainless. There the rare ones as most were fitted in the 90's as the upgrade to have and now are suffering.

why u wanting to change it ? if u sell i want first refusal.

There will be nothing original on this car the way your going lol.
evouk
18-12-2006, 20:41
So whats so special about them?

Surely there are modern equivalents?
northy
18-12-2006, 20:48
nothing at all.

modern day would be a stainless steel one custom made.
evouk
18-12-2006, 23:08
I see, there are a few exhaust manufacturers around that make up from scratch.

I will see whats up with mine first.
stew
20-12-2006, 17:15
yeah best to take it off, and get a replica made up, if you really want a new one.

mild steel will give a different tone to stainless, and will obviously rust, and will offer different heat transfer properties. (not sure if thats good or bad really!)

basically get something made up to the same spec, but with as few joins and bends, so its as free flowing as possible.
northy
21-12-2006, 16:15
Posts moved to here guys as it was going away from the original thread.

http://www.williamsclio.co.uk/forum/viewtopic.php?t=17775