PDA

View Full Version : can anybody pleeease help!!!



david932
12-12-2006, 00:28
can any1 who knows anything about subframes have a look at this and tell me if it bent or ment to be like this?

pics about half way down the thread.

http://www.williamsclio.co.uk/forum/viewtopic.php?t=17234

thanks

David

Gav
12-12-2006, 00:39
If i can mate i will take a pic of mine tomorrow in the daylight so u can compare 8)

david932
12-12-2006, 00:57
YEAH!! :D :D if you could that would be top mate. thanks

arj256
12-12-2006, 01:52
I dunno if this pic is of any use?

http://homepage.ntlworld.com/peterj.jones/My%20Clio/Subframe%20On%2016v%20Clio.jpg

The marks you have look more like jacking marks in someways.

northy
12-12-2006, 08:45
they are jacking marks

Clio_GTT
12-12-2006, 09:00
they are jacking marks

don't be so sure though, the williams subframe is completely flat across the bottom, the 16v isn't and its harder to tell a ripple from a pre existant fold/bend. I managed to bend my subframe and shocker by hitting a curb. They're not the hardest things in the world

northy
12-12-2006, 09:15
they are jacking marks

http://www.williamsclio.co.uk/forum/files/bent_frame_197.jpg

that is where axle stands and trolley jacks plus a bit of scuffing from the tarmac has marked it.....