View Full Version : F7R engine - Megan 710
Same as Willey bottom end with superior head (much better potential for porting and bigger valves than willey). Recognised as a better basis for a stonking engine.
As above, bought from breakers with a suggested mileage of 43,000. Currently with its head off and valves out, bores, valves and seats are all in absolutely immaculate condition with no detectable signs of wear.
Can be sold with head on, as-is or fully re built with new cambelt, gastgets etc.
£400 ono (depending on whether built etc.)
Cheers for looking Jonny
jwarren2k2
04-12-2006, 19:44
are you after £400 for the bottom end and head (not built)?
I'll keep an eye on this as im planning on getting one after xmas when i have money again!
thanks,
james 8)
basically, yes.
join the club on the whole christmas money thing!... :shock:
i may buy the head off you if split it.... as im looking to get some headwork done and would probably use a machined meg head. let me know if u are splitting it
£225 for the head
Got a brand new 1.8 16v head with seats but no valves too £60
have you got any proof of the milage at all mate?
No, but I can take pictures of the bores/seats etc...
No, but I can take pictures of the bores/seats etc...
would be useful mate. ium very tempted in this. was gonna rebuild mine next year but this could be an easier and better option
ok mate, i'll take some tomorrow.
More detailed pics to follow
still available if anyone is interested
would make a lovely xmas present for the wife/girlfriend
Amirclio
12-12-2006, 15:01
What am i gonna need to put this thing in my valver? I.E wiring loom ECU etc.
VERY INTERESTED
Cheers
Amir
did ya take any more pics mate?
no mate, been a slacker! will try remember tomorrow though :lol:
What am i gonna need to put this thing in my valver? I.E wiring loom ECU etc.
Not totally sure but think there are several routes:
Just use the bottom end and have a re map
Use a modified megane loom and ecu
Use a williams/valver loom, williams ecu and machine the head to except the dizzey
or get a programmable ecu and a megane loom
Best as the likes of stan for a concise answer
Cheers jonny
no mate, been a slacker! will try remember tomorrow though :lol:
if you wouldnt mind some pics of the bores/pistons as the head is off
cheers mate, very interested in this
donsrno1
14-12-2006, 02:37
How much for just the bottom end? PM me.
Engine still for sale due to me being a slacker and going on holiday for three weeks.
Long awaited pics of the bore's attached. Engine should be back home this wk so any further pics shouldn't take so long :lol:
£200 for head (+ valves, cams etc.)
£150 for block (pistons, rods, crank, sump, water pump etc.)
£50 for 1.8 16v head (no valves but brand spanking new)
Open to sensible offers, cheers for looking, Jonny
what a gay, forgot the pics again, sorry...
petemears
09-01-2007, 15:21
if the engines still available id be happy to give you 400 for the lot
maakusan
31-01-2007, 00:26
Long shot after so much time... Still available? Want the whole lot for an R5
have u still got the engine for sale m8 and will it fit into a 1.8 16v mk1??
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.