PDA

View Full Version : Bumpers



DaveH
28-11-2006, 20:19
Where are the mounting points for the front and rear bumpers and what is the best way to get them off (without damaging any of the flimsy french brackets etc lol)?

stevie_b
29-11-2006, 15:04
for the front one you take the numberplate off (or at least one screw out so you can rotate it) and that will reveal a hole cut in the bumper, within which is a nut that you need to undo.

I've never taken my rear bumper off but from photos I have seen they also have a hole cutout behind the numberplate so assume it uses a similar method.

Hope that helps.

VIPERONE
29-11-2006, 18:16
one bolt behind front no plate, 2 10mm bolts either side and 2 nuts on the front mounts

rear i cant emember

Matty86
29-11-2006, 19:59
did both today

rear is the two side ones and 5 in the middle

there is no bolt thru the hole behind the numberplate.

instead, the bolts are accessed from underneath with 3 being along the bottom and 2 above it (inbetween the gaps between the 3 bolts at the bottom)

oh.. and 2 on the top (which u can see if you take your light clusters off)

northy
30-11-2006, 09:02
there should be a nut behind the front number plate.

DaveH
04-12-2006, 20:05
Cheers lads, il have a go soon as a bit of a winter tidy up is needed!

Matty86
04-12-2006, 21:58
there should be a nut behind the front number plate.

i was on about the rear one :) - stevie said there is a bolt behind the numberplate on the rear one. there isnt :)